Forum Replies Created
-
AuthorPosts
-
March 4, 2015 at 10:11 pm #1963
If this doesn’t work then I give up
puu.sh/5e0O9.jpg[\
puu.sh/5e0P1.jpg[\IMG]
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 8 months ago by vs manta 218.
March 4, 2015 at 10:07 pm #1958I built this twin 3 inch exhaust just before Gary built his
Did have different rear mufflers before but have since fitted this varex mufflers now
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 8 months ago by vs manta 218.
March 3, 2015 at 4:22 pm #1691Oo I like your style
March 2, 2015 at 9:08 pm #1381Nice stuff
I never knew this was once a 6
Good work
March 2, 2015 at 8:34 pm #1354Finally after so many hours work I got the fire wall painted black and while I had black in the gun I did my brake booster as well
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 7 months ago by vs manta 218.
March 2, 2015 at 6:58 pm #1248The engine lost oil pressure so out it come and back to Pavtek it went for bronzed lifter bores and new bearings
So while it was out I took on a job many said was out of my league
I proved them wrong, anyone with ambition can achieve what they want to
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 7 months ago by vs manta 218.
March 2, 2015 at 6:57 pm #1247So in the process of making my fuel tank I also made these 1/2 inch fuel lines
I then got a new cooler as my future plans would max out the 75mm thick one I had fitted
New one is 600-300-120mm and good for over 900 hp
Then I got fuel tank finished
Then my rear seats turned up
- This reply was modified 9 years, 8 months ago by vs manta 218.
- This reply was modified 9 years, 7 months ago by vs manta 218.
- This reply was modified 9 years, 7 months ago by vs manta 218.
March 2, 2015 at 6:56 pm #1244I got a hoist and did a over hall on the under carriage
I had a exhaust built from a shop and when looking at it of the car I noticed it was very poorly made so I chopped it up got my mufflers off it and started again, now I have access to a ac/dc tig making my own exhaust made sence
Duing the construction of this my front seats turned up
March 2, 2015 at 6:56 pm #1243
This is its first power tune with vortech v2 running 8 psi
This is how it currently sits !!! I have put in no effort into trying to make this any sort of show bay, every thing in here is for go or because its easier to work on!! Later on once I know every thing that has to be where ill start to think about what I will do to make it pretty and hiding wiring and doin braided lines but right now its more about tearing engine mounts apart and breaking every thing behind the crank
I changed to black braided lines and made a alloy intake
So a while back I went down the strip and realized stoping was a issue
March 2, 2015 at 6:55 pm #1240This paint work here has been done in a shed as a home job me and my mate who is a panel beater did it I put a big thanks out to muzza for his work and expertise this is straight of the gun no rubbing and buffing has been done yet I did give some of it a quick hit with polish couple weeks ago !!! it will get a wet rub with 2000 and buffed once the car is drivable to get that glass look !!! All the inside parts and anything that is black I painted my self
March 2, 2015 at 6:55 pm #1239Then the motor turned up and it was time for it to all go in
As it stands now the body kit is about to be fitted this weekend and this is about 3/4 weeks away from first start !!!
March 2, 2015 at 6:54 pm #1236Got it back and started reconstruction
-
AuthorPosts