CommodoresPlus

happy fu€K!n bday to ya

personally i would prefer the misses to give me a blowie over a water pump, but what ever floats ya boat I suppose

<p style=”text-align: left;”>Have had the same years ago, coolent temp was telling ECU it’s minus 35 degrees and ECU thinks fuck yeah and pumps in loads of fuel</p>
<p style=”text-align: left;”></p>
<p style=”text-align: left;”> Myn was back firing then when changing gears sometimes just stall</p>

Every 355 will kepp making power if you raise timing to 32 degrees up top end

And most will pop heads doin that as well

28 is the usually for 355 up top end

Myn has 32 down low at idle

goin to take it out and bump it up to about 18 degrees timing now then just do a power run to see what it’s making and see how it behaves to 17 and 19 degrees

it very well may want 20 or 21 degrees timing in it as its only got 14psi but it’s making huge power for that boost level

don’t know what the most power…[Read more]

That has come up nice as

well done

4mm is heaps lol, I have 4mm clearances in front as well

ice idea with the brace, I see mustang boys brace it to the strut top but back to engine is much better

That has come up nice as

well done

4mm is heaps lol, I have 4mm clearances in front as well

ice idea with the brace, I see mustang boys brace it to the he strut top but back to engine is much better

Yeah it does

it might actually have 2 holes in it

not sure can not remember but it definetly has at least 1 hole

Is it possible to add extra head bolts ??

yep

iv got a hose with bend to manifold that Iv tryed as well

I know it causes pressure or some shit but here I am all fine

i remember back on 98 fuel days I tryed a few different things for keeping it cool and I remember the 3mm hole in thermostat  helped it and that nipple blocked off must of been better as well other wise I would…[Read more]

So pulled the heads off and got the gaskets all changed

just st a stupid amount of work to do but it’s all done now, every cyilender had blowen out slightly

Couple pics of showing some random blow out parts, I match ported the heads to Intake manifold as they where out by around 1.5mm each side but didn’t do the exhaust ports as I’m getting a…[Read more]

https://www.ebay.com.au/itm/131908616317

never used one or had one but aparently these ones with this new mosfet power supply or what ever it is are ment to be pretty good

well new compared to the old modules made in the 90s, they been out for a few years now and ment to last a long time as well unlike the other unreliable items

When the intake ports are out from head to manifold by about 2 mm and exhaust ports on heads are square and extractors are round I’m guessing it’s not great

Got arp head studs 12 point nuts

And cometic mls gaskets 0.040

<span style=”line-height: 1.5;”> </span>

<span style=”line-height: 1.5;”>Changing them because a while back i had 1 of the heads off just before changing to e85 and could see one was starting to blow out so now im onto changing them before we really screw power out of…[Read more]

when I own a drag car it will not be registered, it will be a drag car

this manta is a street car, if I ever get a defect or it gets me into to much trouble I would pull motor and chuck a basic ls combo in it and take this motor and sell blower, manifold, Intercooled and so on and use that money to fund a injected 8/71 on it and put it into…[Read more]

If I can do a 10.9 in manual with 4:11 on what is essentially street tyres I would be over the moon lol

i dont see it happening though, with the old v2 blower manual was great fun, now though it is starting to become a hand full to drive fast

maybe be I can fluke it on a pass some time hopefully lol

if I set it up for drags with tall tyres and th400 and a 5000rpm stally I have no doubt 140+ would happen

with me shifting from 2nd to 3rd on the brink of traction I for see 130mph

Cheers people

it does look much better now with these wheels,  stuff 20 inch rims, personally I think the 18 look heaps better with tyre to rim proportion

Will be good to see what mph I can get now as I can get a lot more power down with these

Few pics of how it sits these days

glad photos dont show all my imperfections lol, there is a few of them lol

looking back through, yeah Gary we spoke about how tolerances are pretty poor in cars, even today cars can be wicked out of square sometimes, and may speak to you more about the centre caps soon to

cars running…[Read more]

Looking now they have changed there name to pro meth and have some serious stuff now

i have the 3 gallon tank on there site and pump mounted Under the tank all as a part of it

http://prometh.com/collections/all

Looking now they have changed there name to pro meth and some serious stuff now

i have the 3 gallon tank on there site and pump mounted Under the tank all as a part of it

http://prometh.com/collections/all