CommodoresPlus

Quicker to buy the one that just got passed in at 800k on the weekend hahah

Looks like it will be a good move.

Ahh fair enough. I couldn’t remember what you had decided.

You will be very limited on how much you can shorten it, without mini tubs. So before you give the guy a measurement be 100%.

Best way is to remove diff and lower the car over the wheels and then measure in between.

Obviously this is much easier with a hoist

Ahh fair enough. I couldn’t remember what you had decided.

You will be very limited on how much you can shorten it. So before you give the guy a measurement be 100%. Best way is to remove diff and lower the car over the wheels and then measure in between.

Obviously this is much easier with a hoist.

you not going to take it somewhere to get it done?

Are u doing tubs? Won’t be able to shorten it much if you don’t.

Once you shorten the diff. Put some nice phat tires on them.

I personally didn’t mind it. Comes down to combo and application.

Passenger side I kept that hole as that’s where the new loom runs.

4.11 with cams like that.

Cam? Stall? All play a part in choosing.

Hey all, thanks for your patience. I believe the issue is resolved now.

Basically we renewed the certificate a week ago and the host stated they would install it since I was in the midst of moving to the UK! Unfortunately it seems they didn’t do so correctly but I didn’t think to check – anyway I’ve now reinstalled it myself and as far as I can…[Read more]

Not sure Tbh. He color matched it. Think it’s Alaskan

Battery Isolator.

Yeah. Got my self a bargain so can’t complain.

Ill have to tackle that when I get to it. I’ll make some bodgy/cheap ass enclosure if I have to.

But aside from that, I’ll be running a 5 inch intake with a pod.

Just take plenty of measurements and make reference points on where the current shifter sits prior to taking it all apart. That’s the best way.

IMO yes. For the amount of driving I did the additional $1500 for the true track I can’t personally justify.

There is a guy near me that did my mates. JR modifications. Does very good work.

Just spool it. Save your self a bucket.

Made paid $2200. Bw shortened. Full spool. Altra9 31spin axles. 1/2 wheel studs. Housing tubes welded.

He supplied the gears.

That’s the plan