Very nice car. Have sat and read the complete build thread.
Also exec24 without wanting to take up much of this build thread. I have just finished the mods to suit Vt master using vs booster. Which going off the instructions from calais turbo forums was very helpful but basically its as below.
<p style=”text-align: left;”>Unbolt the master. You then remove the bolt out of the master cylinder side of the booster which would sit in the back of the master cylinder. Cut the head off it Then put a slit in the end so you can screw it back in with a bit of locktite (otherwise could collapse the inside with nothing in the center)</p>
Master bolts on and you use the vs reservoir with a small new hole to drill and tap. Bend the brake lines to reach.