CommodoresPlus

All the baily channels replaced, and 3 out of the 4 windows back in.

Got the rear boot panel back from James, my painter, did an awsome job of re spraying it, matches perfectly

Yes have a new set of bailey channels , what spray lube do you use ?

<p>Yes went with 225/30s, probably could have snuck 23 5/30s in there ok, but dicided to go with what I new would fit from others experience.</p><p>still need to adjust the ride height, up a touch at the front, and down a couple inches in he rear.</p>

Bumpers and grill fitted

tail lights installed, waiting on boot moulding being refurbished by painter.

maybe baily channels and side windows next, but not looking forward to that lot…

Cheers, will do…..

Had the underside of the car chip coated, helped a mate do it on his hoist, took a couple of hrs to mask everthing off and cover the paintwork, but well worth the effort, looks so tidy under there now.

Installed the coilovers and bolted the wheels on.

Looks like I’ll have to have the coilovers lengthend a little, they are set at max height and…[Read more]

Installed the coilovers and bolted the wheels on.

Looks like I’ll have to have the coilovers lengthend a little, they are set at max height and there aint no motor or box in there yet ….

Only bought rear tyres at this stage 245/35/20s they are a bit wide and tall , grab the front of the gaurds when turning in, so looks like I’ll need to go…[Read more]

Thanks, was looking for something different.

its a custom colour my painter threw together, 70% violet pearl , so really pops in the sunlight.

Should look good with silver bumpers , calais/royal door moulds and the HDT wheels.

Couple more pieces of the puzzle.

20 x 8 1/2″ Momo star wheels

Abruzzi powerglide with trans brake rated to 1200hp

Okay Just been through this whole thread and reloaded all the pics…

Thanks Photo Bucket grrrrrrrrrrr.

%5BURL=http://s103.photobucket.com/user/Johnvolle/media/297858C0-BEF0-4F48-9C22-C9D9FC904206_zpsjvik9tr3.jpg.html%5D%5BIMG%5Dhttp://i103.photobucket.com/albums/m123/Johnvolle/297858C0-BEF0-4F48-9C22-C9D9FC904206_zpsjvik9tr3.jpg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s103.photobucket.com/user/Johnvolle/media/F7FF8A91-E2FC-4070-8666-A0C24E7C2033_zpspg…[Read more]

Here’s a few teaser pics from the paint shop.

Big thanks to James my painter who came up with this custom colour,

in his words the colour looks absolutly insane !!!

Can’t wait to get it home and start peicing it together .

Here’s a few teaser pics from the paint shop.

Big thanks to James my painter who came up with this custom colour,

in his words the colour looks absolutly insane !!!

Can’t wait to get it home and start peicing it together .

A 4″ grinder and thin cut off wheels.

We started out small and slowly opened it up untill we were happy with the clearances around the manifold.

Big thanks to Scott for his grinder skills

I think the rip shifter will work, just need to mount the handle so it kicks forward instead of back.

Cut the bonnet for the manifold.

may still do a reverse cowl with a spare bonnet I have 

off to painters next week 

Cut the bonnet for the manifold.

may still do a reverse cowl with a spare bonnet I have 

off to painters next week  :…[Read more]

Cut the bonnet for the manifold.

may still do a reverse cowl with a spare bonnet I have 

off to painters next week