CommodoresPlus

Got enough confidence to have a go at my first body repair.  Did the section behind the cargo doors.  They are not kidding when they say some replacement panels need to be “massaged” to the right shape!  It had to be aligned vertically with the door side, to keep that gap consistent, which meant it hung down at a few degrees at the back.  Bit of…[Read more]

Got enough confidence to have a go at my first body repair.  Did the section behind the cargo doors.  They are no kidding when they say some replacement panels need to be “massaged” to the right shape!  It had to be aligned vertically with the door side, to keep that gap consistent, which meant it hung down at a few degrees at the back.  Bit of…[Read more]

Suesy says Happy New Year too!!  I guess its just part of Aussie rural living life.  But imo, just getting the hell out of there is the go, no good being a dead “hero”.

Shit mate, that’s not good!!  Brackets neat though, stay safe, happy new year!!

  There’s def that too.

I reckon I am calling it for today, thankfully way cooler.  Got the front longitudinal member welded in that goes under the cargo doors.  Then had to rebuild the lower part of the C pillar.  Shit fiddly job tbh.  Not super happy with the transition of how the old and new parts meet, but I think its just the nature of repr…[Read more]

Great work.

I don’t think that operating in a tidy work space is so much ocd as it is common sense, esp with safety in mind.

^ I loved my LC GTR, I wish the guy that stole its armpits to be infested by the flees of a thousand camels!

Love this build mate. Seriously unless you have done one you don’t understand the time effort and thought that goes into it. Top work, going to be a weapon. Very thoughtful build.

Yea just makes everything easier.

More progress, one pretty much fully welded floor area. Lots of (for me) difficult welds in weird and hard to get too places. Started out the day with my welds a bit ordinary, but got much better by the end.  I think its a cross between technique and settings.  But really starting to make some progress. Now I have something solid to build off o…[Read more]

Insanely hot over here, so up at 7 to get an early start, too hot by 1pm.  Think I have sorted the side runner end detail, folded and welded it, have left the front end a little long but can trim that back.  Practiced a lot of plug welds and got the welding settings good I think.  Then went to the bus and very happy with how they all turned ou…[Read more]

Hot again today, but sometimes you have days where you end up with a lot to show for your work like yesterday, then days like today which are a fiddle.  But got the welder out, the I Beams are tacked up in place.  Also started working on the B pillar, turns out I thought I had bought the assembled lower section of the whole pillar but I only got t…[Read more]

That’s it for today, just too hot out there!! Got the old I beams off, lots of back and forth to hardware store to get set back up again, but really enjoying it. Took some helpful advice from someone on the Kombi forum and concentrated on using the new shift tube as the datum. Just took my time. Nothing is welded up yet, just clamped or temp…[Read more]

<span data-offset-key=”7d3gg-0-0″><span data-text=”true”>That’s it for today, just too hot out there!! Got the old I beams off, lots of back and forth to hardware store to get set back up again, but really enjoying it. Took some helpful advice from someone on the Kombi forum and concentrated on using the new shift tube as the datum. Just took my…[Read more]

Such a shame Holden closed after making arguably their finest in the VF.  Very nice, congrats.

Just been out and gone through it all Looks great quality.  But I guess I won’t really know fitment wise until I get into it.  Can’t wait though. Super excited. Bit of Christmas duty for the next couple.of days.  Then can start on it.

I must admit that’s something I haven’t been accused of.  Mind you once or twice maybe have been accused of going a bit over the top  

Much boxes…..christmas came early.

That PS pump looks.like it was made to go there. Perfect.

And we have parts!