CommodoresPlus

I also crop nearly all pics I have posted up using IrfanView to reduce the file size down as a lot of forums have a 100kb or less file size for posting pics up direct.

Hi all, some of you would know I spent a lot of time on the L67Torque forum. As a admin from the start, to take it over for a few years & now back to just admin on it. After paying out of your own pocket for years to keep it going for the benefit of others, I too got tired of trying to hussle members to throw a little in to help. With the coming…[Read more]

Hi all, some of you would know I spent a lot of time on the L67Torque forum. As a admin from the start, to take it over for a few years & now back to just admin on it. After paying out of your own pocket for years to keep it going for the benefit of others, I too got tired of trying to hussle members to throw a little in to help. With the coming…[Read more]

How many people on here are now affected by Photobuckets change of Terms & Agreements ?

Basically I am screwed as there are no longer 3rd Party Hosting Images to forum etc unless you become a paying member.

The year fees are nothing short of extorsion.

Ok will give them a crack next.

Cheers

The blue led wedge ones from jarcar were only $2 each as well. But still not the right colour for my old eyes at night, it seems to dull still. Might try the red ones.

Interesting work there, I have never seen or heard of that Flange & Punch Tool before.

Well all my issues with gauges not working was a bad common earth. Did not think that would make a gauge peg out but obviously does. So the Fuel pressue, Oil pressure are working fine now 😊 .

Well all my issues with gauges not working was a bad common earth. Did not think that would make a gauge peg out but obviously does. So the Fuel pressue, Oil pressure are working fine now 😊 .

Thanks for the reply.

So think I will do it as well. +8 would be good to get even if I have to settle for the resulting wheel position forward of guard centre.

Yeah that’s the one. Did not realise they were talking about a dirt track car, as he just said track car & I immediately though bitumen road races.

Did you ever get an answer back on the adjustable castor rods ? I bought & fitted the Whiteline kit which has stamped on the side of the rods “Race Use Only”. So gather they are not legally acceptable on street cars.

I went from a standard castor of around 4 degrees up to just over 6 degrees before the tyres started rubbing on the front…[Read more]

Did you ever get an answer back on the adjustable castor rods ? I bought & fitted the Whiteline kit which has stamped on the side of the rods “Race Use Only”. So gather they are not legally acceptable on street cars.

I went from a standard castor of around 4 degrees up to just over 6 degrees before the tyres started rubbing on the front…[Read more]

Just what you need….more work.

Got a new Autometer oil pressure sensor on the way. Hopefully that is the issue with oil pressure gauge.

Yes Autometer Pro Comp Ultralites.

The Oil Pressure does nothing if the sensor wire is disconnected & reds turned on.

The Oil Temp gauge was doing the same – pegging out on the max side of gauge when attached to the stock GMH water temp sender as a trial. Although later I got it hooked up to the correct sensor & earth that to the engine &…[Read more]

New problem with the gauges I have fitted. The oil pressure gauge needle winds off the clock & pegs out to near the maximum when the ignition is turned to the reds. Once engine is fired up it moves a little more off the clock.

The brand new fuel pressure gauge doesn’t move  at all even with just ignition switch to reds or the engine running. A…[Read more]

The mech fuel pump is new. Plus we just had the engine apart for new seals, gaskets,rings, bearings, solid cam, VN heads etc.

He does not want to spend more money if he call help it, converting to electric fuel pump.

As for the fuel pump drive, we had to remove the longer drive pin from his old cam & fit it in to the new cam. The eccentric cam…[Read more]