CommodoresPlus

Looking to fit a new pump either way, one of my plans was to get a second hand Ls1 pump assembly and fit a walbro…. so I’ll go with something along those lines

as for the other parts is there any part numbers/brands I should look at in  particular, types of regulator etc?

Looking to fit a new pump either way, one of my plans was to get a second hand Ls1 pump assembly and fit a walbro

as for the other parts is there any part numbers/brands I should look at in  particular

Cava, for the fuel system can run a standard pump? or do i need to go aftermarket

any particular brands

no problem, will look into it

Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around

 
I know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me

 
also cava seen one of your posts on another forum somewhere, what involved in fitting a M80 into a VT series 1 5LT? mate of mine has his VT that is starting to whine, he…[Read more]

Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around
I know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me
also cava seen one of your posts on another forum somewhere, what involved in fitting a M80 into a VT series 1 5LT? mate of mine has his VT that is starting to whine, he wou…[Read more]

Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around
I know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me
also cava seen one of your posts on another forum somewhere, what involved in fitting a M80 into a VT series 1 5LT? mate of mine has his VT that is starting to whine, he wou…[Read more]

Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around
I know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me
also cava seen one of your posts on another forum somewhere, what involved in fitting a M80 into a VT series 1 5LT? mate of mine has his VT that is starting to whine, he wou…[Read more]

<p style=”text-align: left;”>Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around</p>
<p style=”text-align: left;”>I know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me</p>
<p style=”text-align: left;”>
also cava seen one of your posts on another forum somewhere, what involved in fit…[Read more]

<p style=”text-align: left;”>Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around</p>
<p style=”text-align: left;”>i know the spicer ones are about $550-600 off eBay so $700 fitted seemed ok to me</p>
<p style=”text-align: left;”>also cava seen one of your posts on another forum somewhere, what involved in fit…[Read more]

Pretty sure that’s what they quoted me on, they said there’s cheap and nasty ones around

maybe?….depends on price…was leaning towards  3.7’s though

boss quoted be about $700 to supply a new gearset, including install which i thought was pretty good.

So I’m on the right track……

It’s going to cost the same for a new gear set, so might go for the 3.7’s

Im a bit worried that if I went with 3.46 it might not be quite enough

Just a 4L60e from the VX

Also what ratio diff gears would you suggest?

i was looking at either at 3.46 or 3.73, I don’t do much highway driving but my VS has 3.9’s and they make the engine rev a bit on the highway, which can irritating after a bit

i have a LSD that I removed from the same VX SS as the LS1, but it’s only 3.07 so want to put something in it, and just…[Read more]

Also what ratio diff gears would you suggest?

i was looking at either at 3.46 or 3.73, I don’t do much highway driving but my VS has 3.9’s and they make the engine rev a bit on the highway, which can irritating after a bit

i have a LSD that I removed from the same VX as the LS1, but it’s only 3.07 so want to put something in it, and just get i…[Read more]

the engine is out an 2002 VX so from what ive found it should already be the LS6 manifold

might give it a miss for the time being, and if i decide to do something i’ll  just get the 241’s worked on