CommodoresPlus

well i did fit a manual cable release from a VS executive(as mine runs a Calais rear harness), but i have disconnected the boot lock to allow it to fit

well, tomorrow i’ll double check the above first, then i’ll start going through wiring, I quickly double checked it today when i do press the boot release button on the remote, im sure i can…[Read more]

well i did fit a manual cable release from a VS executive, but i have disconnected the boot lock to allow it to fit

well, tomorrow i’ll double check the above first, then i’ll start going through wiring, I quickly double checked it today when i do press the boot release button on the remote, im sure i can hear either the BCM or a Relay…[Read more]

i’ve got Optima yellow tops in both my cars,  the one in my VY is about 5 years old and the car is used Daily.

the one in my VS is about 4 years old, i have a feeling that one on it’s way out though, probably as the car has been parked up for a while

i’ve got Optima yellow tops in both my cars,  the one in my VY is about 5 years old and the car is used Daily.

the one in my VS is about 4 years old, i have a feeling that one on it way out though, probably as the car has been parked up for a while

I used secondhand carpet tiles. Got enough to do two double sheds for about $400 from memory. There was a guy selling them on Gumtree. He dismantled shops for a living and had heaps of it. Went through it all and got the best ones. I’ll try and find his number, was out Angle Vale way I think.

Sent from my SM-G925I using Tapatalk

I used secondhand carpet tiles. Got enough to do two double sheds for about $400 from memory. There was a guy selling them on Gumtree. He dismantled shops for a living and had heaps of it. Went through it all and got the best ones. I’ll try and find his number, was out Angle Vale way I think.

Sent from my SM-G925I using Tapatalk

My dad works at the plant (still does) and it’s a damn shame to see it all just disappear. He has been there for over 25 years, I remember him bringing home a brand new VR SS, VS SS and VS Calais to drive around for a night. Probably what started my love for that particular model I guess. He would always tell me about the new models and changes…[Read more]

The woodgrain would be aftermarket as its not listed on the HBD option list i have…..

i know a guy that has the equipment to get it made, use to do woodgrain and carbon fibre packages and sell them on ebay

i’ve got 2, i have a Alloy Kincrome 1000kg one, but the main one i use is my Kincrome 3500kg one (Steel type),  i actually find it fits better under a lowered car, reaches under most jackpoints on the car, where i find the alloy one can be a bit short to get to, normally just out of reach.

cant remember what they cost, were a kincrome dealer at…[Read more]

my VS doesnt run an airbag so i modified the clockspring from a VS with an Airbag and wired in a VX set of steering wheel control and a ran a PAC audio Adaptor to my Kenwood H/Unit

All Button work apart from the mode Button, the Module doesnt pick that up, but after not have any of them work for years, i can live with that

my VS doesnt run an airbag so i modified the clockspring from a VS with an Airbag and wired in a VX set of steering wheel control and a ran a PAC audio Adaptor to my Kenwood H/Hunit

sold……………..

bump……………..

maybe use a black VY ute one, probally easier to mount too

if your using VS ones i find they always stuff up, particular the type fitted to the rear doors, which is the same type they use on vn-vs utes for the fronts but are instead mounted in the console, i find the springs in the buttons go, my switches were new and s/hand over the years and…[Read more]

sold…………………..