CommodoresPlus

Second that. Awaiting progress.

Looks very neat. Great colour too, but I’m a bit biased.

i used a VT-VY Charcoal Canister, its rectangular, and mounted up near the fuel tank on VT-VY, underneath the car. I drilled the spot welds off the factory bracket that holds it to the body from a wreck at U-Pull-It, Welded a bit of plate to it and bolted it up underneath the battery tray on the VS, as my battery is in the boot and just routed…[Read more]

i used a VT-VY Charcoal Canister, its rectangular, and mounted up near the fuel tank on VT-VY, underneath the car. I drilled the spot welds off the factory bracket that holds it to the body from a wreck at U-Pull-It, Welded a bit of plate to it and bolted it up underneath the battery tray on the VS, as my battery is in the boot and just routed…[Read more]

i used a VT-VY Charcoal Canister, its rectangular, and mounted up near the fuel tank on VT-VY, underneath the car. I drilled the spot welds off the factory bracket that hold it to the body and welded a bit of plate to it and bolted it up underneath the battery tray on the VS, as my battery is in the boot and just routed the rubber fuel lines…[Read more]

which brand 4 barrel throttle is that?

ok i’ll keep in mind, i’ve put the engine in a corner of the shed for the time being

if i end up fitting it into the VY i’ll more than likely change the gaskets people have mentioned, and the PCV hose, as the one on the diver side is cracked

Ok will do, are the bolts for the intake manifold, sump and timing cover on these engines torque to yield?

Ok will do, are the intake manifold, sump and timing cover bolts on these engines torque to yield?

Anyone?

I ended up buying the one in the link I posted above. Paid about $70 when I got, thought it was a pretty decent unit. Done what I needed which was to setup base timing

I ended up buying the one in the link I posted above. Paid about $70 when I got, thought it was pretty decent unit. Done what I needed which was to setup base timing