[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

Haha yerr I fired it up about a minute before an started straight away an I shut it off, just wanted to make sure the was no oil pressure issue or anything.. then I recorded this. It has no oxygen sensors connected ( need to get extensions ), set fuel pressure an the maff sensor wasnt connected. So I think all that contributed to it not starting properly. Was rich as, as you can see

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

I did a photo bucket video an the link is above. Maybe try click on the pic ?

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

So it was a big night friday night as I finally got my loom back an fired it up for the first time !! Fair to say I was stoked

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

That sucks to hear about the break in mate !! On the bright side congrats on the emissions test its been along time coming ! Hopefully you an the car can make it to VIC one day so we get a chance to see it as well.

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

Ok no worries mate, when the time comes ill get in contact with you an organise to get it calibrated.

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

VPGTS76 ill have to do something about it. The guy who is doing my loom said they change the signal output from 4 cyl to 8 cyl or something along those lines in the computer to give a accurate reading on the cluster, dont know if it’s true or works properly ?

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

Thanks alot fellas. Hopefully not long untill i can take it for it’s first drive. Nah Gary i didnt notch the subframe an i have around 10mm gap on both sides, hopefully the motor doesn’t move to much.

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

[EavzyParticipant Beveridge, VICVS Clubsport View build HERE Member since: March 2, 2015 Posts: 11]

Hey Gary how do you go about uploading pics. Do we use photo bucket ?

[Author]

Posts