CommodoresPlus

I spoke to 3 different engineers across 3 states. 2 said “show me where it says you need a dust seal”

Someone buy my 8x 1700cc Bosch injectors.

$500

Have seen a couple videos of this lately. Also saw it reeled off over 600hp. Tough wagon mate.

28″ tyre too. Will drop the revs down a bit compared to the usual 26″

Russo’s won’t give you the injector dynamic ID1000s. Which are the more expensive ones. They will charge you for them, but you’ll get the Bosch one. Which is nearly half the price.

They did that to me. I paid around $1100 for the 8 “injector dynamics” injectors. To do a bit of research and find that they were the Bosch type which is around…[Read more]

Russo’s won’t give you the injector dynamic ID1000s. Which are the more expensive ones. They will charge you for them, but you’ll get the Bosch one. Which is nearly half the price.

The only difference is, Bosch make them and injector dynamics tweek them a little better. The way to tell the difference is the injector dynamics have a serial…[Read more]

Looks good mate. If you don’t wrap the manifolds, at least do the dump pipe. When I ran mine on pump98, I use to run mine at Powercruise so hot that the floor would smoke. I never had an issue with the paint. 

Good choice with the manifold as well. I’ve chosen to go with one also. I spoke to Jake Bain from Bain racing about runner length and…[Read more]

Why you selling the glide?

What wheel/tyre, suspension setup are you using?

My mate has a 402ci 13:1cr on e85 with t400 and 5000 stall and tells me he has trouble getting it to hook.

Split bumper is one of my favorite cars and Jerry Johnsons Camaro off street outlaws is my favorite car on the show.

I hope I see some big ass fat tyres on the rear of this one. Either some welds or billet specialties wheels.

<p style=”text-align: left;”>Bought all my Holley Dominator ECU from JEGS. Saved over $1000 even after a import tax.</p>

Please run an adjustable alternator bracket, so you dont need to run any other pulleys. I bought one from America for mine. But just sold it because I’m now going front and mid engine plates and it wouldn’t fit with that.

I only ever use VPW as a reference point because they stock most stuff.

Took a little while. Although they usually stock the alumastars and I ordered v-series. I think it was around a 2 month wait. I’m currently waiting for the fronts which I ordered mid January. They reckon mid March.

Maybe it’ll be possible to get a set on the same…[Read more]

Try competition engines. I bought my beadlocker rims from them $300-400 cheaper then VPW.

…and that’s each, per rim.

Try competition engines. I bought my beadlocker rims from them $300-400 cheaper then VPW.