CommodoresPlus

Hi mate yea i have one if your interested, made out of 316 stainless sheet cnc folded and fully tig welded.

Hey Banga its all application specific, gtx extends the choke point at upper pressure ratios, unless your operating at pressure ratios which warrant the gtx wheel (>20psi) it will make little difference. Better off going to next size up…

Looks good mate, Gary could you do one for a 3 speed?! id buy one for sure!

<p style=”text-align: left;”>Yea of course more sidewall… but they are 28″ tall. Probably be a good 2″ taller than what you have now… I hope they fit then I’ll get some haha</p>

http://www.tciauto.com/tc/racing-calculators/

You reckon you’ll fit a 275? A 275/60 is pretty tall…

If you can move it off the line like a 10.4-10.5… I had a really poor 60′ around 1.9 sec so only ran best of 11.1… that was first time racing the car. Yours would have to be close to 1600kg I think mine would be the same but haven’t weighed it yet either…

<p style=”text-align: left;”></p>
<p style=”text-align: left;”>If you can move it off the line like a 10.4-10.5… I had a really poor 60′ around 1.9 sec so only ran best of 11.1… that was first time racing the car.</p>
<p style=”text-align: left;”>Yours would have to be close to 1600kg I think mine would be the same but haven’t weighed it yet…[Read more]

You should just run it more so you can actually feel how fast your car is when it hooks up.. you’ll be surprised. plus it gives you a baseline then to work from, first time out won’t be perfect no matter how hard you try…

Just get some drag radials or your just wasting your time on street tyres.. 340rwkw through a th400 got me 131mph in my ss…

edited your comment…. 

Ill upload some pics when I get a chance of how to do it. Im sure I emailed cav a bunch of pics on how to do it but cant find the email… he might still have it

Best to get the box mounted sit the shifter in loose put the console over the top and line it up and mark it to where you want it, it will pretty much go hard up against the right han…[Read more]

Yes walbro will be fine, might want to run new bigger wiring to it.. Forget listed operating pressures, compare at your specific op pressures.

FYI 044s are not noisy… It’s just how people mount them.

Hankook Ventus rs3

Now that your feeding a bit of boost into it, curious how your going with plugs now? What you end up running?

<p style=”text-align: left;”>Now that your feeding a bit of boost into it, curious how your going with plugs now? What you end up running?</p>

Its nice to be able to just get in and enjoy it!

Cant wait to see what its going to do in May at Heathcote!

When’s it going to be ready?

……And then the follow up

I thought you said it was finished? 

Yea that’s a good spot, that’s where I mounted my gauge, just with some ally plate… But that is awesome being able to just clip in! Well done mate

FYI I found a Tamiya model acrylic paint that matches really well with the dash just can’t remember the colour code lol

Yea that’s a good spot, that’s where I mounted my gauge, just with some ally plate… That is awesome being able to just clip in! Well done

FYI I found a Tamiya model acrylic paint that matches really well with the dash just can’t remember the colour code lol

What you mean man it’s just 165kw with a bt1 chip…. Haha

Thats it! nothing like dusting a brand new cars in a dirty old VS haha

What you mean man it’s just 165kw with a bt1 chip…. Haha

Thats it! nothing like dusting a brand new cars in a dirty old VS haha