[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

thanks very much guys. that picture confirms it.

[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

yep I had mine engineered and passed by the Transport Department with the LS3.

[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

not only dash set ups but they also do a controller which is effectively a programmable fuse box. One 12v lead into it and then it supplies power to the circuits you require. You program the required ampages and it simply trips if the circuit is overloaded rather than blowing a fuse. You can run relays off it etc. Really impressive. Mainly designed for race cars but can be used for road vehicles.

[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

I also looked at some of the solid state products out there like Racepak. A real simple alternative to a conventional fuse box arrangement but it is a bit pricey. Worth a look though.

[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

Ok I understand. $4.5k for a full re-wire in my experience is not over the top particularly if that includes integrating your ECU harness and getting the car running. Suggest you however you get other prices.

[LS3VKParticipant Perth View build HERE Member since: June 19, 2017 Posts: 8]

which harness do you have?

[Author]

Posts