Forum Replies Created

Viewing 20 posts - 41 through 60 (of 159 total)
  • Author
    Posts
  • #21146
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    Thanks guys.

    I’m a bit torn as to Wether or not the inline fuel pump I have will do the job of lifting fuel from the tank but other than that I’m almost ready to start wiring and get her kicking.

    I still need a trans cooler that is small enough to fit yet big enough to do the job but that and fuel is it now.

    I’m halfway between stressed for time and excited as all hell ha

    #21129
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    Plumbed up the return line for the power steering this evening. And then filled the reservoir.  Go me.

    #21086
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    New pressure line

     

    #21042
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    Had a mate come and do final measuring on a new shifter cable and it turns out he can adjust my power steering line so should be right to say those two items can be crossed off the list.

    #21032
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    I’ll be sure to post a skid when she’s ready

    #21019
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    I feel I accomplished stuff today.

     

    Removed the cut power steering pipe from the v6, and bent up the new one ready to be measured and adapted to suit the vans rack.

     

    Got the fan done, meaning the cooling system is now ready to be filled.

    Mounted the fuel pump but now need to get some hose to plumb it in.

     

    Got started on the mounting of the transmission shifter, it’s welded in place but needs to be boxed in to seal the engine bay.

     

    Items left on the list.

    #1

    Fuel pump/plumbing.

    #2

    Transmission cooler/plumbing.

    #3

    Power steering hose made/plumbed

    #4

    Pcm vats removal.

    #5

    Shifter cable(being made atm)

    #6

    Wiring.  (last once everything is mounted/plumbed up. +new plugs

     

    #21017
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

     

    #21016
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    #20933
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    Yeh I’ve been getting told I was overcharged and I suspect I was but it’s done, and it’s in.

    So no backing up now lol.

     

    Got a few things done over past couple days, top hose made, finished the bottom hose, started on the power steering feed line, mounted tailshaft, few other bits n bobs.

    Left to do:

    Powersteering pressure line+return.

    Fuel lines/Pump/filter.

    Mount a thermo fan to the shroud.

    Attach a trans cooler.

    Get pcm deVATS’d and get the wiring done.

    Purchase a battery.

    #20930
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

     

    #20918
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    And the shaft

    #20917
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

     

     

    And then today’s weather is ridiculously hot and then stormy.

     

    #20901
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    have been thinking about the stereo that will go back into this. and id like to aim at the 145db arena. so ill need to have a check on what fits where with the dash in place and then i might see about designing some new door pods.

     

    otherwise, plans for this week are like this,
    Tailshaft purchase/install
    Fuel pump/lines/filter
    Thermofan install+ power steering low pressure lines
    Radiator top hose completion

    fingers crossed for decent weather so i can make some progress. i might even look at the concept of clearing out some of the removed crap from in the back where ive just dumped everything that has come out so far….

    #20850
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    Thankyou sir.

    I’ve been told by numerous people that it lawfully needs to be enclosed so all my “hard work” will be hidden.

    Thinking along the lines of ply board panels, covered in a closed cell foam and then black vinyl upper and black marine carpet lower.  and I will end up making a centre console once I get a shifter

    #20848
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    I’m thinking about trimming down the big rectangle over the cluster.  I’ve got some ideas for how to make it look alot more complete,  but that’s another day.

    #20847
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

     

    #20845
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    I like your pic, I reckon I’ll just do a linked up console.

     

    I do also think I have to panel it in too for safety n such so I reckon I’ll end up covering the whole thing in black marine carpet.

    #20844
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    You’re describing what a hiace is like.

    Here’s what I’ve got.  the square hole on the right is where the old manual shifter went.

     

    #20841
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    So you reckon it needs a centre console type layout?  I can’t decide and I kinda need to soon ha

    #20837
    Profile photo of klampykixx
    klampykixx
    Participant
    Member since: May 16, 2015
    Posts: 167

    I’m tending to agree but I think it will look out of place if I keep with the tube frame.

Viewing 20 posts - 41 through 60 (of 159 total)