Forum Replies Created
-
AuthorPosts
-
September 5, 2016 at 8:34 pm #19455
I put a new heater core in my ss around a year ago because of leaky coolant on the floor just cut the old brass lines with a hacksaw then slid the old one out and put some hoses on with some hose clamps worked fine. I was told the air con needs to be depressurised for a proper install??? but looking great has come a long way.
September 4, 2016 at 2:02 pm #19434Nice work. This has came a long way the last few days getting all the big bits. Ha ha.
September 3, 2016 at 10:37 pm #19413Nice very clean spot for the can too.
September 3, 2016 at 10:30 pm #19412Loving the wheels gmvl. Look tuff under the vl. Are you doing the battery to the boot yourself???
September 3, 2016 at 10:26 pm #19411Well today I looked over the relay for the thermos and nothing swapped the relay with another the same still nothing.
So then I started tinkering dropped the coolant checked the thermostat controller all fine then pulled the radiator out gave it a good flush was a lil dirty. Then pulled the old air conenser and fan out to get my intercooler closer to the radiator and tidy up the intercooler hoses i have all over the place also had some perished hoses. So i have a few things to sort out before shes back on the road.
This is how the bay looks at the moment.
September 3, 2016 at 8:28 am #19403Wheels look mint. My brother has a set of senator wheels had them hammertoned i think its called dont look nowhere near as good as yours. Cant beat a nice clean streeter. And totally agree with finding a good mechanic/tuner they are hard to find. Looking good.
September 3, 2016 at 8:14 am #19402Na didnt check the relay could swap it with another the same see what that does. Cheers man.
September 2, 2016 at 6:50 pm #19388Hey guys just took the car for a small drive this arvo and notice my temp gauge going up to the HOT .And well my thermo fans have stopped. Pulled over let the car cool down for 30 mins. Luckly i was only 5 mins away from home.
So tonight went over my earths, fuses, wires and cant find anything wrong. Even once i checked everything started the car and temp was up they wont kick in, even with adjusting my thermo controller up and down. So a little pissed but ohwell
So plan is tomorrow disconnect everything and run a fuse and switch so i can manually opperate them just for piece of mind. so see what happens.
August 31, 2016 at 6:07 pm #19348Nice stuff vs manta. Looks sweet be great to crack the 500rwkw with a holden motor. Aussie made. Nice work man.
August 31, 2016 at 2:13 pm #19339Larger. Looking sweet
August 27, 2016 at 8:35 am #19298Sweet looked like a good day out. And the senator not many of the 217s about.
August 26, 2016 at 3:40 pm #19288They look like a sweet set of injectors. Nice work.
August 26, 2016 at 11:53 am #19286Ha ha. Thats good. Nice work vs manta. Sounds great the new wheels look sweet suit the car loads better.
August 25, 2016 at 2:34 pm #19276Link worked for me… cool unit man. Nice how you made the stock intake manifold forward facing too.
August 22, 2016 at 10:54 am #19201I know k shock do a set, xyz, pedders, and tein all same just different adjustments pretty sure and there are probley more out there.
August 20, 2016 at 6:09 pm #19172Pretty cool. Different and cool.
August 20, 2016 at 6:06 pm #19171Sits tough . But realistic ????
August 19, 2016 at 4:43 pm #19147Hey guys just a little update was driving around on tuesday night in the ss and was hearing this ting ting sound so anyway got her home and this arvo got some leds for the signal and interior and thought i wonder if the cats gone so pulled it off and put her upside down and wolla.
Thats all i could find. Maybe a bit is in the muffler but mm cant be bothered. Been getting some lenghts of mild steel 2.5 inch together lately me so me and the old man might have a go at it. See what happens.
August 17, 2016 at 7:24 pm #19095Dont mind that wrinkle look dave Looking good.
August 13, 2016 at 10:47 am #19006Well boys small update got the old girl tuned drives so much smoother now than ever seemed more cranky before.
Got a few light leaks one at the gearbox extension housing seal, light one at the back of the intake manifold, and left axle seal on the diff but all minor so not that worried at the moment.
Im thinking just enjoying it at the moment with the family.
-
AuthorPosts