[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

not yet mate still undecided on it

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

thanks mate

it was over 40 deg in the shed when it was tuned

and is a safe tune as well

tuner said on a cooler day i will see any where from 30 to 50 rwkw more

 

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

 

trim blue

paint alpine white

check out this for the rest

 

http://www.calaisturbo.com.au/showthread.php?t=24924

• This reply was modified 6 years, 1 month ago by  DRAG.ON.
• This reply was modified 6 years, 1 month ago by  DRAG.ON.

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

done 2 vnss kits from this place  top kits was the original supplier for hdt as well

great to talk to and isn’t over board with there prices

https://www.ebay.com.au/itm/Holden-VNSS-Striping-decal-kit/263369329532?hash=item3d52090b7c:g:~m4AAOSwiYFXJrbh:rk:1:pf:0

 

Home

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

little idle video

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

thanks cav drives not to bad bit grumpy down in the low revs

and great on fuel on the high way get around 400 ks to half a tank

done 320ks a couple of weeks back in 2 hours and had 2 line above half when i got home

 

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

had some hail damage on the car now its painted in the vf orange close to the ve orange just has more gold in the mix worst job i have ever seen  so waiting on a quot now for a full respray again not from the same place

some of the bad parts had 2 more quots done in mildure and both places have said it needs a full respray pics make it look good but there is runs under coat showing  crap every wear

• This reply was modified 6 years, 1 month ago by  DRAG.ON.

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

top post works well

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

hope this works 

 

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

got a dyno sheet if the up load works 453 rwkw

 

she was pushed to 6800 and stopped as the tuner said after 6800 the pistons start getting a lot of stress so stopped at that if i want to make any more power i need to do a pulley up grade to a 10 rib belt to get the boost over 10 psi  maybe later on will try for 14psi and been thinking about meth injection

 

• This reply was modified 6 years, 1 month ago by  DRAG.ON.
• This reply was modified 6 years, 1 month ago by  DRAG.ON.

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

DRAG.ON wrote:

VRSenator065 wrote:

Funny just passed one this colour just then, looked mint. Sounds awesome on the dyno.

thanks mate have a dyno sheet up until it starts to lean out its not a had push but still came up with a ok figure

got a update on the ve done a mantic 9000  clutch, tiebar lifters, double row timing chain ,arp head bolts and replaced all the gaskets  now making 453 rwkw  at 9psi with a  some wheel spin on the dyno had my self in the back seat filming and 2 people in the boot dont get much time to up date the progress on the car

 

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

VRSenator065 wrote:

Funny just passed one this colour just then, looked mint. Sounds awesome on the dyno.

thanks mate

have a dyno sheet up until it starts to lean out  its not a had push  but still came up with a ok figure

• This reply was modified 7 years, 1 month ago by  DRAG.ON.
• This reply was modified 7 years, 1 month ago by  DRAG.ON.
• This reply was modified 7 years, 1 month ago by  DRAG.ON.

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

cava454 wrote:

You always seem to build some nicely tickled vehicles. Looking the goods, i bet the centrifugal gives it a nice kick in the ass. [/quot

thanks cave keen to have a read of your build you was just getting start last time i looked at her

the vortech works well was running 7 psi before the cam and it was nice

now iv dropped down 3 pulley sizes so from go its making more power  and around 3600 when the cam starts to work its like the blower starts to boost all over again

just got home from a drive and came out of a 80 zone in to a 110 and in 3rd gear it was skiding over the bumps in the road at about 1/4 throttle so im impressed

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

ok got this vid after this it was all down hill

 

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

VRSenator065 wrote:

^looks like my post caught you between yours!

yer a little slow on the keys

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

so now how see sits

06 ve ss vk hdt improved number 51

l98 six speed manual spec stage 3 clutch

3.7 diff upgrade

lunarti double valve springs

custom cam in the 230s

1 piece push rods arp bolts

vortech t trim cant put a number on the boost yet as it hasn’t had a full hit on the dyno yet

have a dyno sheet showing 8psi at 423 rwkw the tune said it was at 5400 rpm

had fuel pump trouble car was leaning out

not ever doing a ve fuel module i tried fitting a walbro 460 lost fuel pressure even before i drove it

so then i looked at the airoflow 325 sounded good so off to the dyno see went dropped the car off and went shopping

came back and see was just starting to make some power looked over and seen 426 rwkw  was getting happy went and got the misses and i record a 430rwkw will try and get the vid up

so good timing cool down time for the car lol

went for a while and came back to a sad face  losing fuel pressure

so out with the fuel module and dale at sps in mildura fitted a walbro 460 my new 1 sitting at home in my shed

new pump powered up with no fuel pressure on removal the shaft was turning and that was it so back in with the old pump 325 a hit on the dyno to do a safe tune

so 423 rwkw  at 5400 got to be happy with that for now just knowing it hasn’t even been pushed to the 6500 limiter yet and knowing the cam will rev over 7000 rpm when it removed i think it will do around or over  over 450rwkw

well last night i did the fuel pump after having a run down on how to mode the filter for the pump it all went well walbro 460 pumping away  more fuel then needed now sorry only just realised pic would have been good  of the mods

with the imfo i found when i was working out what pump to run i found alot of you cant run a walbro 460

there to big  the reg want  hold up it will run rich

my tuner fits them to ve,s now i have and the car has not changed she is running fine so now is just a matter of getting it back for a final tune

• This reply was modified 7 years, 2 months ago by  DRAG.ON.
• This reply was modified 7 years, 2 months ago by  DRAG.ON.

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

will get some threads going as soon as i get some time

the vn been set back for a  while yet as the ve has to be re tuned

and is waiting to go in for a full strip down and respray as it was hit by a hail storm last November

from xmas to now iv built a vn ss 383 for my son inlaw he is a penal beater spray painter so together we have the hole car covered besides a tune

then a old school 1972 ford fair lane  rust repair and full respray

can be had to start on my own

so starting a car for my self can get hard as as i get ready to go some 1 will turn up  with a job

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

thanks cav.

the way it sits now

the next time it fire up it should have a set of rear mount turbos and only be used for the drags

[DRAG.ONParticipant broken hillve vk hdt retro blown cammed vf 25th clubsport build number 42 of 100 vnss tuff 355 was blown now going turbo View build HERE Member since: October 2, 2017 Posts: 25]

a dam shame was a member of both as well

so many builds and detail gone

even if we put as mush detail as we can remember of our on builds they will never have the fine point they had when they were first done

owned my vn for 17 years now and ran a best of 11.44 in Adelaide back in 2000 and has had 3 different engine set up since then at the moment it a forged 355 4 bolt with roller cam so many years with 1 car were do you start  your build thread

[Author]

Posts