Forum Replies Created

Viewing 7 posts - 21 through 27 (of 27 total)
  • Author
    Posts
  • #11185
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    Would you be so kind as to update us on your progress as I myself am quite interested in this type of thing also with my VP Calais.

    #11099
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    +2 for pics

    #10155
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    Hey mate, I just came across this, this is exactly what you had in mind isn’t it? http://www.shop.gforce1320.com/product.sc?productId=367&categoryId=932 Has a full write up etc.

     

    Ive seen that before always wondered if it would work on VP-VS subframes.

    #8549
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    Whats different about the VR/S and VT/Z handbrake assembly?

    #8414
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    I’m quite interested in this mod have you researched it much?

    Yea a bit, a few guys have done it, thinking it through it seems like a good idea. I think its worthwhile if your pulling a lot of revs, the ps pumps don’t really like screaming along, a fluid cooler would help with that of course. It also will look a lot neater with the pump and pulley removed, just one less thing on the front of the engine. I know aesthetics isn’t on top of everyone’s priority list, but it is part of the equation

     

    Has anyone documented the process at all?

    #8397
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    Might post them in a separate thread in the tech section too for others. If it works ok would be a good mod, especially if your cooking steering fluid etc.

    I’m quite interested in this mod have you researched it much?

    #7427
    Profile photo of dazedv3
    dazedv3
    Participant
    Member since: March 8, 2015
    Posts: 31

    Hey mate followed your build through JC and SC really like it. Just curious if you could shed some specifics on your fuel tank setup as I have a VP  ITS with LS1 and want a surge tank but without doing a boot install there isn’t really anywhere to mount one.

Viewing 7 posts - 21 through 27 (of 27 total)