[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Up until the VNSS forum died he was still quite active one that and very reachable.

Im spewing I  never saved his number. 

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Shouldn’t need a safety loop if it’s a 2 piece shaft. If you follow the factory setup you should be sweet.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

<p style=”text-align: left;”>

Immortality wrote:

You can say what you like about JC but they are still here and evolving where SC is no longer and there were plenty of tossers on that forum too. Plenty of good people and info on JC you just need to ignore the idiots. My point was that magazine had the finances to run a forum properly but chose not to because the writers were more interested in milking the sponsors to further there own goals instead of looking after the readers and forum members. That magazine went stale years ago!

</p>
<p style=”text-align: left;”>i tried but I gave up in the end.</p>
<p style=”text-align: left;”>The fact they got rid of tapatalk didn’t help either. I don’t have a PC so it’s all on the phone</p>

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Too many peanuts on JC

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Thank god for the that. Open up the oil return at the back near the dizzy. And hack into that and get it super smooth

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Tell me u didn’t hand file that?

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Didn’t know they made it for the ratchet. Good stuff.

 

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

You may need a gated shifter

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Dish is a whole different ball game….

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Not all manifolds. Must have raised runners to fit it in.

Group A had them from factory

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Just had enough…

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Ian is long gone….. he won’t be back

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

If manifold is off. Run it from the valley

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Would be cheaper to just run the converter box. @$500

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Nice stuff mate. Nice little addition to the 3D family.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

They fit with some tweaking. That’s how everyone running decent dish on Vy-VZ is doing it.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Best shifter money can buy. Awsome.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

VHSLE CRUISER wrote:

I already have battery relocated with kill switch to it,then someother things that need to b pushed in specific sequence to start the engine + 2x club locks (front,rear of the steering wheel) and a clutch/brake pedal lock. My stuff above is that a good start Cheers,

You seem paranoid…….

 

solex locks are rubbish.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Awsome work mate.

How good is that feeling

• This reply was modified 7 years, 12 months ago by  cava454.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Your 6 years to slow.

 

Shift must be tight. U don’t want to love tap it and not have the gears select correctly.

[Author]

Posts