Forum Replies Created

Viewing 20 posts - 581 through 600 (of 2,358 total)
  • Author
    Posts
  • #25463
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Starting to make some good progress on this now! Where’s the fuel tank going? Can you keep one pipe on each side all the way to the back and use 2 rear mufflers instead of a single twin in twin out one?

    Using stock tank. So only outlet one side. Which I prefer anyways TBH.

    #25444
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Nice choice. I got same shifter but in the  silver

    #25442
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    My mate runs a glass bonnet on his vn. Really light. I considered one for mine. But not needed. I don’t have  scoop.

    #25433
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Looks like a glass Bonnet. Alfa is making glass doors also now.

    #25429
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter
    #25425
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    T400. 1000hp capable. Fwd pattern.

    Converter is Custom. Guy building the box is making it. Will be 3000

    #25421
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Gearbox, cooler and converter ordered.

    #25420
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Unleashing the powa

    #25408
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    I’ll 2nd the motion

     

    quality gear.

    #25397
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Loom arrived today. Still sitting in garage. Haven’t even had a chance to un pack and have a look.

    #25396
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Good stuff mate. Mission accomplished.

    Now time to go faster.

    #25391
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    would you consider the mufflers that have the butterfly for loud and people friendly

    Varex mufflers. Nah I’m not too keen on them.

    There will be ways around making it quieter which shouldn’t be too hard.

    • This reply was modified 6 years, 11 months ago by Profile photo of cava454 cava454.
    #25384
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Yeah engineering. But without blower. So aspirated.

    Right now maintaining 10mm clearance is tuff. When I do tubs the rear section will be changed to over diff.

    Hope its not loud lol

    • This reply was modified 6 years, 11 months ago by Profile photo of cava454 cava454.
    #25379
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    I brought this setup off a mate for $400. So I just used it for now. Eventually I’ll go over diff. Under is a PITA.

    #25367
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    #25361
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    WHY in gods name would they not bring the zl1. Stupid IMO.

    They should also looking into the CTSV

    #25357
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    J Homosexual…..

    Pickup tomorrow. Haven”t been this pumped in a long time. He didn’t get around to installing the LSA cats, but that’s no big deal. It can be done when it goes back for tubs and ass end.

    Also got word my fuel rails are just about ready also. Just need to be dispatched from the US of A.

     

    IF anyone wants any parts from USA let me know and we can bundle to save on postage. :good:

    #25354
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    I’ll ban myself

    #25344
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Looking good. But WTF is the Big Square thing lol

    #25341
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    I paid half up front. I wasn’t in a rush obviously, just would of been nice to stick with the original 6-8 week time frame.

     

    Any how. It should be killer. So I’m pumped to get it and start wiring.

Viewing 20 posts - 581 through 600 (of 2,358 total)