Forum Replies Created

Viewing 11 posts - 161 through 171 (of 171 total)
  • Author
    Posts
  • #1419
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    updates finished getting the front spot welded back in today and its coming up great was going to get it blasted again but decided to work with this as a base while the strut skirts were removed we smoothed out any unwanted defects took a few hours to get it to here

    #1418
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    update got the shell to a mates shop to get some of the pannel work done had a rather large talk about the bay decided that the sheet metal was rough due to previous repairs so then this happened

     

    bought another low km shell for new strut skirts so they will now be replaced

    #1417
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    so i decided to move my coils off the engine and into the plenum to cover up the coils i got a plenum cover off lowe fabrications a while ago finall test fitted it

     

     

     

    also striped the shell bare and sent it to the blasters to get engine bay and the outside of the windscreens cleaned up

     

     

    #1416
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    and got my diff back from media blasting aswell came up pretty good

     

     

    fogot to add this to the thread start i was playing around with a shift light idea i disassembled my steering coloum to solid mount my shift light if you haven’t seen these gizzmo shift lights before there such a sweet piece of gear carbon fiber super light and don’t take up much space perfect for where i want to put it. i also polished my steering coloum the visible portion anyway came up pretty nice :D.

     

     

    #1415
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    wasnt happy with my trailing arms so i started from scratch had to use another set of arms i had laying around there off a vk so they had a hand brake cable brack on them which i had to get off

     

     

     

    got some plates laser cut this time was so much easier than hand cutting also looks heaps neater

     

     

    welded in

     

    #1413
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    my diff housing is originally out of a f100 unsure of the year housing is cleaning up ok but ill get it media blasted through the week

    #1410
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    updates

    built a trolley to keep the car mobile for the minute also striped the front end and did some work on my nine inch setup today im not running tubs or a hugely modified rear end due to engineering but ive shortened it 1.5 inches (each side) and cleaned up my factory tubs which means i can fit a 19X9″ rim and possibly a 275 tyre i spent most of the day today cleaning up my diff housing i also boxed up my lower control arms to hopefully make it a bit more rigid up back

    #1408
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    found some small rust under my windscreen (hole on the right is meant to be there as a drain hole the hole on the left isn’t its a rust hole) rust wasnt to bad for a vl

    #1405
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    started playing with my custom dash and mock up wiring loom (more on this later)

     

     

    test fitted gear box and extractors everything fits quite well just need to modify sump for more k frame clearance

     

     

    pulled everything back out removed k frame and suspension for over haul

     

    #1402
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    wet down to u pull it and got a new piece :) tacked it in i dont have a photo of the finished repair

     

     

    noticed the previous owner cut out some of the boot interior separator for a sound system

     

     

    again a trip to you pull it

     

     

    fixed

     

     

    and dyna mat

     

    #1401
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    interior stripping

     

     

    found my car had been in an accident in a past life they did some excellent repairs on the quarter panel and door but neglected the spare wheel well they decided to fill with filler :/

     

Viewing 11 posts - 161 through 171 (of 171 total)