Forum Replies Created
-
AuthorPosts
-
March 2, 2015 at 9:53 pm #1485March 2, 2015 at 9:52 pm #1484
thanks mate
small update sump is back from ceramic polishing and i had some time to make a mounting plate for my glove box fuse box and isolater switches
March 2, 2015 at 9:52 pm #1481and heres how it sits atm
March 2, 2015 at 9:51 pm #1480update engine still isnt in but i got my cannon plug mounted coil packs are in mounted in the plenium 6 of the 8 leads as well (i run out of gromets for the last 2 leads) also tracked down a nos roof lining what a mission to put in that was but i got there in the end
March 2, 2015 at 9:51 pm #1477March 2, 2015 at 9:50 pm #1475small progress made up a bulkhead doubler for my wiring loom cannon plug for the engine came up pretty sweet and i got bored and decided to polish my clutch master cylinder came up pretty shmick
March 2, 2015 at 9:50 pm #1474modified sump
March 2, 2015 at 9:50 pm #1473diff closeup
March 2, 2015 at 9:49 pm #1472deleted my reverse lock out solenoid but kept spring tension
March 2, 2015 at 9:49 pm #1471update motor diff and box are painted and finished welding my sump
before
after
March 2, 2015 at 9:49 pm #1469installed
March 2, 2015 at 9:48 pm #1468pedal box assembled
just an fyi for anyone who gets the ebay fire wall to pedal box rubber on a manual you will need to cut it to clear the clutch master
March 2, 2015 at 9:48 pm #1465starting tail light loom
finished
March 2, 2015 at 9:48 pm #1464some updates still welding up my sump (almost done ive been lazy)oncw done i can get the engine in but got some other stuff done in the mean time mounted my ecu up and installed my body side of my scratch built engine loom reinstalled my power mirror /window loom after rebuilding it and also built up my rear taillight loom from scratch and i reassembled my pedal box now i got the pedals back from being coated
March 2, 2015 at 9:47 pm #1463ill just leave this here
March 2, 2015 at 9:47 pm #1462progress almost ready to come home
March 2, 2015 at 9:46 pm #1460also made some progress on scratch building my wiring loom started with the body side of the engine loom
March 2, 2015 at 9:46 pm #1459March 2, 2015 at 9:45 pm #1457updates got the guards bonnet boot and a bit of the front back together
March 2, 2015 at 9:45 pm #1455manifold spoiler
-
AuthorPosts