CommodoresPlus

some more progress front end is back on the ground

some more progress front end is back on the ground

progress finally progress extractors back from hpc and fitted, coil overs fitted alternator and brakes.

made some small progress started fitting a few things up started to modify my shiftier plate due to the rip shiftier being further forward than i measured up no biggy it all fit the console fine but the shiftier was really high so i made up a shortened shiftier arm came up nice. control arms are back from coating also cam up sweet, ordered all my…[Read more]

made some small progress started fitting a few things up started to modify my shiftier plate due to the rip shiftier being further forward than i measured up no biggy it all fit the console fine but the shiftier was really high so i made up a shortened shiftier arm came up nice. control arms are back from coating also cam up sweet, ordered all my…[Read more]

was abit ocd making sure i dont scratch it lol

progress has been made i finally finished building my engine and gearbox. engine is now a home built ls1 stock crank h beams forged slugs hand ported heads and a mild 224/230 112lsa isky cam gearbox is just a refreshed t56 from a vx ss with 100000 kms or so i was told put a rebuild kit through it inspected everything was pretty happy lets hope its…[Read more]

thanks mate

small update sump is back from ceramic polishing and i had some time to make a mounting plate for my glove box fuse box and isolater switches

and heres how it sits atm

update engine still isnt in but i got my cannon plug mounted coil packs are in mounted in the plenium 6 of the 8 leads as well (i run out of gromets for the last 2 leads) also tracked down a nos roof lining what a mission to put in that was but i got there in the end

small progress made up a bulkhead doubler for my wiring loom cannon plug for the engine came up pretty sweet and i got bored and decided to polish my clutch master cylinder came up pretty shmick

modified sump