Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #18175
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    That’s awesome info, I’m running 60lbs Siemens vdo deka injectors on e85 mafless tune runing 10 lbs boost with side mount blower on a 304 with 210/50@495 cam hypertek flat tops on a kalmaker tune, got 380hp at the tread with loads of talk. Auto 2800 hi stall, stage 11 shift kit 3:9 gears. Loving it for a 5 ltr! 100 shot noz for Xmas would be nice.

    #18174
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Tough VR SS by the way!!

    #18173
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    How you mean, be careful not to knock the float while installing?

    My fuel gauge stopped working 12 months ago so I’ve been topping up e85 every 300 klms ha ha been getting 300klm on 40 ltrs.

    Will be nice to have a gauge that works again once I do the install mate

    #18170
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Well said I’ve spoke to lots of people running it also on e85 for years with no issues.

    I’m going that way be ordering one tomorrow from Sam’s customs, does em in the assembly ready to drop in for good price.. cheers for all the Feed back!

    #18157
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Ha ha typo ment are you running e85 with the gss342

    And for how long?

    Great to here they go straight in will go that way, are they rated for e85

     

    • This reply was modified 8 years, 4 months ago by Profile photo of Brock Brock.
    • This reply was modified 8 years, 4 months ago by Profile photo of Brock Brock.
    #18153
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Did you have much trouble fitting them in your fuel assembly and where you running E85.

    Do you remember how many amps it draw as free flowing lift  pump doesn’t say on their website cheers

    #18148
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Did you fit the walbro in the vs fuel assembly cava

    Are you using as lift pump or main cheers

    #18138
    Profile photo of Brock
    Brock
    Participant
    Member since: July 4, 2016
    Posts: 10

    Thanx for the reply mate just unsure if it would fit in the fuel assembly how did you have your two set up? I’m wondering if it would go in the oem fuel assembly

Viewing 8 posts - 1 through 8 (of 8 total)