[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Came up killer!

I painted this in Ppg Deltron 2K.

Colour code 1J052 [Alpine White]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Masked up and ready for paint!

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

 

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Much appreciated guys. All sorted

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

gtrboyy wrote:

How did you go with the diff dude? Got any measurements? Was hoping you’d do an indepth on engine bays so I can learn more lol.

Still havn’t got the diff back mate. I think he is still waiting for his shipment of foote axles to come in from the states.

Diff has to be 1394mm disc to disc in order to fit the 15×8, 4″ backspaced wheel.

 

[/quote]

cava454 wrote:

Looking great. Whay I meant was, I need someone to paint my bay lol

Haha I know man, unfortunately i don’t have any resources to do backyarders. Makes it hard sometimes, even for myself.

I had to sell my work an iPhone 4 just to use the booth.

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Got stuck into the bay yesterday. Got everything i wanted to be gone and welded done.

Now a little bit of fine filler and its ready for primer! [not full smoothing out. just cleaning it up]

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Got my Spicer gears back from HPSF [high performance surface finishing] in Carrum Downs and they came up bloody awesome!

I can vouch for this isotropic polish, it really makes the gears go the distance. It reduces the friction and the whine like you wouldn’t believe. but, mainly prelongs the life of the gears

Before:

After:

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

cava454 wrote:

So u can paint you say……..

I don’t understand this statement haha

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

cava454 wrote:

You in good hands with Matt Smoores. Why dont u want to cut it? Just the inner wheel arches. That’s all.

He’s a gentleman man. I have alot of time for him. I do the paint work on both his and his mrs cars.

Still not cutting it up. I want to keep the body as it came from the factory besides a few extra holes haha. Modifying tubs and that sort of thing doesn’t interest me.

 

gtrboyy wrote:

Nothing wrong with minitubs.Not necessary BUT does ensure you’ll fit rims/tyres you want & have sitting the way it’s meant to. Particularly if you want it to still look factory is split tub down middle,cut the inside tub out then trim shell down to chassis rail for extra 1-2 inch clearance. Trimming metal down & prep friggin’ crazy amount of hours required to keep factory look though. Refit factory inner tub with 1-2 inch strip.Neatest looking way to do it & majority of people wouldn’t know unless they owned similar car. Mind you can achieve same result with some strategic sledgie action + few other tricks…car may sit touch higher than you want though. Bonus is fraction of the labour time required…

I gotcha mate. being a spray painter i know whats involved unpicking and modifying the tubs. You are right, there is nothing wrong with it, but, its just not for me. most of my mates have tubbed theirs and it doesn’t appeal to me in the slightest. Body says the way it left the factory apart from a few extra holes.

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

gtrboyy wrote:

8.5″ rim 255/60 tyre? Usually hear around 1300mm for diff although never sure if BUF or axle flange face of housing.End up with drum brakes. While others say 50mm of each just enough to keep rear discs. Standard wheel tubs Ofcourse usual grind down seat bolt,lower control arm mods & some sledgie action to wheel tub,rear part is easy thin metal front is reinforced part harder to bash. Then it’s either tap flat shock cover or snip it off..also be wary tyre clearance to bumper bar. Got my vh sle to redo & vk executive thinking about doing but look all factory.

You have given me alot to think about and look out for mate. Thank you for that!

I have upper and lower adjustable arms from Pro 9. so hopefully we should get it to fit in a position where the qtr lip isnt comprimised. But, no doubt will need a massage haha.

It’s an 8″ rim with 4″ backspace mate. Hoping the caliper will sit in the rim. i guess we’ll just have to wait and see.

 

cava454 wrote:

I’ll measure the one I got at home tomorrow. Are u doing tubs also? i still want those bloody rims FML.

cava454 wrote:

My VL diff is as short as you can go. It up to the shocker mount using the drum brake conversion. I’ll measure face to face tonight. I brought it off the bloke with the 8second White VLT COLSEY His was untubbed at the time running that diff and a custom 15×8 5bs 255 et streets. But it was fairly raised in the ass end.

haha you are more than welcome to try them on mate.

A definite no for tubs. i don’t want to cut it up!

Ah yes Shaun, he is a nice guy. He is mates with the guy that built my engine [Matt ‘Slim’ Smoores, red vk magnuson blown 9.1sec driven street car fstgmh].

I actually bought his rear shocks and 90/10’s. And yes it is still raised in the ass. A very vl turbo thing to do as well. Very quick car. Best of all its Andra teched.

If you need fittings, racepak etc see him. he owns Raceworks.

VRSenator065 wrote:

Mate seriously that looks bloody awesome. If I was building another commie this would be it. I would prob put a Calais nose on it and paint it that champagne colour (whatever its called) but seriously what a weapon. Keep us posted mate so enjoying following this build.

Too kind mate. I saw you shared the link to the build on facebook. I shared it again haha.

Do you mean like the gold vl calais ‘gdsgft’ [gods gift]?

Fair enough man. I love the Berlina front end. To me the calais front has been over done. Especially when you go to Summernats haha.

 

• This reply was modified 8 years, 4 months ago by  Bdj_007.

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Good to see some progress man. Got a rough eta?

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Measured up the diff. it has to be 1394mm disc to disc. hope the diff guy knows what he is doing. i dont have alot of room for error!

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

gtrboyy wrote:

Thinking not only roll wheel lip but that hump just above inside arch could do with some dolly work also to help not only lower but also get slightly tucked tyre look…otherwise car will sit higher than you like it. Got a tubbed sle that sits tad too low(305/50/15),wheel lip not rolled full arch…sidewall caught & ripped it…not happy jan!

 

Thats ALL BAD haha. The early girls definitely wernt made for a wide tyre thats for sure.

Problem is the paint cracking a flaking one thats lip is rolled.

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

While the diff is out i had a bit of a play with the amount of space in the tubs. with a 255/60/15 im really not sure if i can get it to fit without rolling the lip. looks phat though!

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Last night [Wednesday] got the remainder out, the fuel lines, diff, front bar, headlights, condenser and a few a/c lines. all thats left is the booster and the bays ready for me to paint

• This reply was modified 8 years, 4 months ago by  Bdj_007.

[Bdj_007Participant 2002 Holden Vx Commodore 1986 Holden Vl Berlina View build HERE Member since: March 17, 2015 Posts: 206]

Conversion has started! And i got that ‘one last drive’ up to my mates place in as well.

Got from the tailshaft forward out when we started last Sunday 

• This reply was modified 8 years, 4 months ago by  Bdj_007.
• This reply was modified 8 years, 4 months ago by  Bdj_007.

[Author]

Posts