[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

I like holden engines also lol, great to see

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

to blown vs. Jason helped with the combo had the heads done organized the crank and rods(he cops a bit of a hard time from some people but everything he did for me was first class)I had mike from factory re get my motec he did the harness wired and tuned it another guy that has been more than helpful.can I post video on photobucket ??and I also got a few laps at barbagallo on the weekend to bed the eng in a bit was only able to get about 12 laps in before a minor oil leak stopped my fun, that said that after I don’t know how many years and how much money it was great to spin the tyres again

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

so I finally got it started and after some issues with the injectors in went straight on the dyno for a soft tune and at 80% throttle 20 deg timing and plenty of fuel went 381 at wheels so not too bad for a run in tune.for a guy who spends his spare time working on v8 supercars he was impressed said plenty left in it.will do final tune on his new hub dyno after I put some  miles on the engine

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

http://s629.photobucket.com/user/jahaley14/story

• This reply was modified 8 years ago by  jezza.

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

so after finding outmy ICE module wouldn’t work with the motec I had to send it back to be modified then wait for my mate to finish Sandown and Bathurst but every thing is finally wired and finished .I am hoping to have it running on Tuesday . so hopefully the next post will have a driving pic.These are a few more photos I found

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

still waiting for motec to be wired should be Monday I hope .these are a couple of cars ive been working on lately

[jezzaParticipant vk ss View build HERE Member since: February 15, 2016 Posts: 46]

3. Stage pump all scavenge from sump this creates the vacuum in the engine and then you adjust the valve to about 7 inches of vacuum ,this same set up is on 2 other engines that do not have any of the issues normally associated with Holden v8sthey r both track and targa cars. That said the cost involved would put most people off it, I think the covers r torque power tho I could be wrong

[Author]

Posts