Forum Replies Created

Viewing 20 posts - 221 through 240 (of 292 total)
  • Author
    Posts
  • #16448
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Be patient. You will not recieve drop box until t350 is in possession.

     

    I want to put it in as redoing interior at moment and dont want to pull apart again to do shifter

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #16267
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    O i missed the bit on using the dakota sender unit, after seeing your post and researching i figured thats what you most likely used!

    Love the look you have with looking standard but not quite! Much nicer than just hacking a ratchet shifter in. Was thinking of mounting the led gear indicator they sell in the dash some place as well

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #16257
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Mate awesome build!!! Noticed your ratchet shifter install. I want to put a ratchet shifter in my ute. The way you have done it is very clean, love it. I have got a drop down box and hope to do something similar. How did you get the lights to activate in gear position indicators?

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #16215
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Girl “he has how much under the bonnet”…………………”why does he keep that much money under the bonnet” lol true story

     

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #16214
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Go to jamie at full flight engineering mate, did my ute, i put a harrop diff center in it with skyline 3.7s cost me under two k and bullet proof. Killed the standard rebuild lsd that cost me 1500 in less than a few months.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #14423
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Lol like 6 years ago everyone saying o why not ls swap its a ten k job, lol nec minute heap of unfinished ls swaps for sale as well over ten k.

    Would think not much change out of 20 k once the lsa actually in and ready to hit the strip etc

     

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13783
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    The new place has a few bonuses lol

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13468
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Got 3.7s in my one! Made huge difference from 3.08, go a Harrop center while you at it. Best coin I spent careful tho as one that fits 3.7s doesn’t fit 4.11 so make sure you are 100% first. Think Harrop center was around a grand

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13467
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Yea but will respray guard, accidentally clicked antenna bezel in and didn’t want to break it taking it out so masked around it and clear not perfect around edge.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13461
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Because i like to be all over the place with my build i am currently thinking maybe a v2 charger for the ute, just pricing things up at the moment.

    Will do some more panel work to ute, respray hard lid as it never got done and unhappy with one of the guards as a small mark in clear coat as was lazy when painting it with some masking.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13460
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Yea thought i should give it a clean also i put it in a dumb spot i didnt want to weld the boss to plenum as was worried about warping it so it runs off a hose and i know the hose did make tuning it harder, but saying that ran like a dream for years. Maybe the fact it doesn’t get driven much allows it to stick.

    Ignore the retarded intake lol was simply to get the first tune, but see how the boss is on back of catch can with a hose going to plenum.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13427
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Na still drives fine just no ability to idle.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13418
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    How much were the DMS coilover and shocks? Also as far as I’m aware yaman, only the SS utes didn’t have a rear sway bar.

    I know which is strange considering its the ss lol

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13403
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    How did you fit rear sway bar? As i didnt think utes came with them, my one does not have one.

    How long does the tank of meth injection last for? Want to charge my ute and keep twin throttles so going intercooler will be hard to do. Are you on vn ss i am sure i have seen this ute some place else

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13358
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Yea was thinking you could swap the throttles to other side, when I got this manifold there was another vl manifold with throttles on front corners as twin turbo. As I know with charger and current throttle position would make pipe work near impossible !

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13357
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Sounds awsome, keen to see pics of tubs, still want to tub my ute. Pics of bay as well. Are you running an intercooler with charger?

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13338
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Want to keep the 355, dont want to do a engine swap. Maybe a dumb idea but just want to keep the original motor in it, yea i know it will cost but can acquire parts over time etc.

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13311
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Yea will need to lower compression, when i had jap cars could use special thick head gaskits to lower compression, can you do it this way? How else can i lower compression

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #13282
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Get some pics up mate, sick of been the best ute on here lol

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #12861
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Isn’t it the manifold neck pushing it up tho?

    Need a hand with bonnet? Make sure u got a finger file to neaten everything up and use the ultra thin grinder blades

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

Viewing 20 posts - 221 through 240 (of 292 total)