[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

So got drop down box from cav, carpet is out will start on shifter soon! Ill post pics as i go considering no one on here has done with 4l60e.

 

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Standard sound deadener any good? As have a shitload of aftermarket gear with the alloy on one and bituman style on the back. Could i stick over the original?

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Anyone know how good the standard sound deadener is (not carpet underlay)? As trying to get temps down in car from zaust. Is aftermarket matting with alloy back better? Or could i stick aftermarket over the top of it? As i know removing is a prick as would need to use dry ice etc.

Pick of new black facia installed looks so much better, yes still have aftermarket dials as in the move lost the hsv original cluster faces haha. Understand momo wheel not to everyones taste but was the best looking wheel with crash pad that i could find. And yes handbrake cover been replaced, back in 2007 this was the best option i had as leather was peeling on standard one.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Got my bits back from my painter, came up as always exactly how i wanted them. Satin black for all the dash facias and gloss for the door trim pieces.

Also got my drop down box for the b&m shifter, just waiting on my dekota shifter position gizmo. Once shifter arrives ill take the grinder to it and make a few minor adjustments. It will sit down in the standard facia and run in standard slot. It will run the dekota to light up shift positions, a lot of people just run all one colour led in each but honestly thinking maybe green for all drive positions, red for park and reverse and white for neutral. Or is that too much just stay one colour?

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

cava454 wrote:

dazedv3 wrote:

How did u get the badge made?

Got it made by Jason Ackland @ Stickthis Decals Dont have a lot of time or luxury of kitchen in garage to get a hell of a lot done of late. But wiring is under way. My mate Tony come passed and gave me the heads up for now on what to do.

Hahahah that would be the wifes worst nightmare mate!!! Can vouch that cav has some impressive bits of kit to go in it, the wiring will def be a chalenge would think its up to Tones n how long it takes, not sure how much ol Cav will be doing

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Wow they make anyones car a banner pic now days?

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

If your lucky could get one that will bolt straight up to the 304, clutch is the expensive bit and finding a hydro pedal box

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Well done in a few months you stuck a sticker on

 

You always spinning spanners on it but i am seeing not much progress i stand by my comment last night that really you just go to shed n watch porn telling the wife “i am going to spin spanners”

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Pics?

 

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Mate whilst its getting repaired quarter, should sling the guys a few bucks to do it for u

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Na mate was the only option with the ss ute and the guy didnt get it lol.

Some pics of tub liner for bloke asking about liners, this is a raptor liner. Can be tinted to body colour and sprayed through a sound deadener gun. Very little prep work required hence i used it as really couldnt be assed spraying inside tub

Lol found this pic, my panel beater knows i am a little ocd when it comes to paint etc so he polyestered the whole rear of ute, hence its so flat

• This reply was modified 8 years, 5 months ago by  Slow355.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Any pics of shifter install, currently doing my one, was it very tricky doing it with 4l60e? Or instructions etc make it straight forward?

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

HDN05L wrote:

The kit cost me about $300 took a day of prep. Not slippery but its not an everyday car so im not really in the back that often.

Lol a day of prep, how many beers you have ;) Give the ute tub a clean with a scrubbing brush the clean with prepsol and rub down with scotch bright. Then spray in, i used raptor liner, you can also tint it. And yes it is hard as fuck, its slightly slipery. If you go in my thread i think i have close up pics, you need zero skill to apply it just like sound deadener.

 

 

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Na whilst i have the seats n everything out may as well have a crack at keeping the heat out, literaly makes you sweat on a hot day. Prob 150 worth of materials.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Looks mint love the shifter set up mate!!!!

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Cavs momo actually looks pretty good!

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

So got the facias ready for paint going satan black then gloss black with the caprice door moulds. See how it looks, as getting caprice trims re covered in the 25i colour vynal and maybe black leather inserts in door trim.

Got all the seats out etc, new black seat belts, momo wheel in and ready for new carpet. I am going to try heat proof around trans tunnel to combat all the zaust heat. Can get underlay with heat resistant backing

I understand wheel not to everyones taste but cheaper to go aftermarket than have my standard one retrimmed.

• This reply was modified 8 years, 6 months ago by  Slow355.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

VH308 wrote:

Milling marks from removing the ford logo from the xf falcon throttle body before mounting it to the group a

 

Yup lol couldn’t believe it, it is just an xf throttle with ford ground off it haha.  I actually found a shop selling brand new ones, got a few for 200 bucks few years ago, probably should have stocked up. No idea what the secondries one was off tho.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

looking good mate what power u after?

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Yea when i built my hq i filled every hole etc in firewall, sickaflexed around any dodgy grommets, sprayed shitloads of sound deadener onto floor, then thick underlay with alloy backing and thick carpet. The difference it made was astounding!!

Worried about getting to thick tho as vs plastics have to clip back over the top, not like hq where stuff could be screwed down like door sills etc

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Author]

Posts