HomeForumsClassifiedsParts Wantedvs/vr coolant overflow bottles being made now by dayco

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of Slow355 Slow355 7 years, 11 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #12077
    Profile photo of sands vs
    sands vs
    Participant
    Member since: March 1, 2015
    Posts: 619

     

    Scott H organised these through dayco.. As rare spares did nothing despite much efforts over the years by many of us

    You can now order them through repco, bursons $65 Part number is dot0036

    They look good and are reasonably priced too. Only difference is they removed the holden part number for legal reasons and it has dayco etched into it

    • This topic was modified 8 years, 11 months ago by Profile photo of sands vs sands vs.
    • This topic was modified 8 years, 11 months ago by Profile photo of sands vs sands vs.
    • This topic was modified 8 years, 11 months ago by Profile photo of sands vs sands vs.
    • This topic was modified 8 years, 11 months ago by Profile photo of sands vs sands vs.
    • This topic was modified 8 years, 11 months ago by Profile photo of sands vs sands vs.
    #20740
    Profile photo of sands vs
    sands vs
    Participant
    Member since: March 1, 2015
    Posts: 619

    People that have got these how have they found them?

     

     

    Also have the come with the yellow mark on them?

    #20746
    Profile photo of thatotherguy94
    thatotherguy94
    Participant
    Member since: March 2, 2015
    Posts: 189

    The one in my daily still seems to be fine, hasnt gone yellow and has been in there for a while now. I dont think mine have the yellow mark but can have a look in the morning. Only thing is id use the original cap as the one that comes with it keeps popping off because it doesnt clip down like the original ones

    #20755
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Looks good not a bad idea

     

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

    #20764
    Profile photo of vspete
    vspete
    Participant
    Member since: May 2, 2015
    Posts: 74

    Mine can with marks too but don`t care much.

    Still looks good and can see coolant.

    I black marked the level lines too.

    #20770
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    Can also get them on ebay

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.