Vs Ute – Warlike

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

jlss wrote:

Can you run a valley to catch on all manifolds??? Dont think i could on mine thats all??

On the twin throttles and after market i think people get them tapped in and run a dash fitting. Correct me if i am wrong

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Not all manifolds. Must have raised runners to fit it in.

Group A had them from factory

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

So not much has happened lately, lost motivation for awhile. All though I still ordered parts and what not. Going to summernats got me the motivation I needed lol.

New valves.

Thought I throw the front end together just to see how good then new manual rack and coilovers were.

Also purchased a vb commodore for my partner for her bday, to clean up and put on club rego to enjoy on the weekends. This will be her project car she’ll work on.. Lol

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Is that one of those power steering racks that’s been converted?

What made you go down that road? Clearance or that manual “feel”

Just refresh my memory, this is purely a track car,correct ?

• This reply was modified 7 years, 9 months ago by  cava454.

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

What coil over are they?

EDIT realised i already asked this. Think you said ebay ones, be interesting to see what they are like

• This reply was modified 7 years, 9 months ago by  Slow355.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Converted one from Grimm Industries. Just wanted to run manual one. Didn’t want to much shit hanging on the motor lol.
Gonna be a track/burnout car but still street registered. Lol

Yea just the cheapies. Having a little trouble with them being a little bit wobbly at the top where the bush and plate meet..

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Yeah I no the ones. Be weiry it won’t be the same as a proper manual rack. It will be heavier.

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Some updates..
Heads all ported, machined + milled
Oil pump preped
Front cam bearing + cam bolt mod
Still need to paint block and waiting on the cometic head gaskets and hardened push rods. Then she’ll be ready to start up!

Also starting working on the bay again, redone the boxed headlight tops and welding up the last of the holes and heaps of grinding. Haha.

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Looks like you have been a busy boy!  Nice work.

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Thanks mate. Feels good to be working on it again..

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Just waiting on hardened push rods, and it’ll be ready for its first start up.

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Loving the look of that front bar!

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Anonymous wrote:

Loving the look of that front bar!

Thought the same thing!!

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Thanks guys, finally got the rest of the engine painted today.

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[CallanParticipant View build HERE Member since: April 24, 2017 Posts: 7]

That looks great!

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

<p style=”text-align: left;”>Looks good mate. What’s the single line going to the back ?</p>

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

Just coolant crossover.

Sent from my SM-G928I using Tapatalk

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Ahh k

thought u might of have a y piece.

Checked to see the dizzy fits?

[TrglavcnikParticipant VS SII Ute, VN BT1 View build HERE Member since: March 2, 2015 Posts: 43]

let ya know tomorrow. lol

--FB Build Page For H2O RAT--
https://www.facebook.com/pages/H20-Rat-VN-BT1/1408724789391215

[Slow355Participant Victoriahectic spec 355 vs ss ute View build HERE Member since: March 2, 2015 Posts: 322]

Nice, love the front bar think its the same as what was on the blown momo vs ute.

munch munch ls1s for lunch
Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

[Author]

Posts