VR v2.0

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

OKC. Custom rails.

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

May as well have cut those ears right off they’re not doing anything are they?

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey Cava what is wrong with the rails that came with it also you should cut the aluminium of and round it off look a lot cleaner just my 2cents

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

I was going to. But I couldn’t find my cut off disks. I’ll see what this looks like with fittings on. Might look snug.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

5inch k&n filter rocked up.

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Wont be surprised if you end up cutting them off as IJ said, I am guessing you are using those big ass ally spanners for the AN fittings, and they need a lot of room, the more the merrier.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Ordered a whole heap of speedflow 200 series fittings for the fuel system. So once that arrive I can get cracking

Also reinforced the blower brick.

Bay is in primer and ready to roll hopefully paint next week and back to me after grand final.

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

do the blower bricks have a weak point cava

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Under decent boost they collapse.

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey cava are you doing a close loop of open loop for intercooler I assume you can do an open loop

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Judge1 Frazer wrote:

Hey cava are you doing a close loop of open loop for intercooler I assume you can do an open loop

What do you exactly mean by this?

 

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

cava454 wrote:

Judge1 Frazer wrote:

Hey cava are you doing a close loop of open loop for intercooler I assume you can do an open loop

What do you exactly mean by this?

Hey Cava I’ll try and explain it, not sure if I am right but with the lsa blower the water to air is a sealed unit like the Subaru’s , so close loop , so can you run it with a extra tank so you have more volume of water/liquid open loop so you can add to it if need be , hope I am making sense

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Factory system has no tank. But has an inline fill point near the blower.

Ill be running a 15L tank in the boot. Plenty of capacity

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

cava454 wrote:

Factory system has no tank. But has an inline fill point near the blower. Ill be running a 15L tank in the boot. Plenty of capacity

So you could put ice in it at the drags if you want

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

That’s the plan

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Few pre birthday goodies arrived. This will sort my fuel system.

Speedflow 200series

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

nice goodies

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Yeah. Got my self a bargain so can’t complain.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Baby Doll is ready for pickup on Tuesday.

Sills Painted

Bonnet re done

Scuttle panel

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Getting exciting 

So Shiny and White, which White is it?

[Author]

Posts