This topic contains 64 replies, has 10 voices, and was last updated by Profile photo of cava454 cava454 8 years ago.

Viewing 20 posts - 1 through 20 (of 65 total)
  • Author
    Posts
  • #14162
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    still holden power my vk ss

    #14167
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    <p style=”text-align: left;”>will try photos again</p>
    <p style=”text-align: left;”>eng is 355 has crankshaft rebuilders crank,manley pro mod rods,manley pistons</p>
    <p style=”text-align: left;”>block is 4 bolt using come caps</p>
    <p style=”text-align: left;”> with bronzed lifter bores all  oil core plugs converted to screw in plugs</p>
    <p style=”text-align: left;”>crane solid roller cam and lifters</p>
    <p style=”text-align: left;”>come alloy heads,ccd chambers,and flowed</p>
    <p style=”text-align: left;”>vn twin throttle body intake</p>
    <p style=”text-align: left;”>full dry sump using Peterson r4 pump,asr sump,moroso oil tank all -16 lines</p>
    <p style=”text-align: left;”>tko temec</p>
    <p style=”text-align: left;”>ap 4 piston calipers&330 mm rotors front</p>
    <p style=”text-align: left;”>ap 4 piston caliper & 280 mm rotors rear</p>
    <p style=”text-align: left;”>9 inch diff tru track 3.7 gears</p>
    <p style=”text-align: left;”>alloy tank 2 lift pumps swirl pot aeromotive tsunami h/p pump and reg</p>
    <p style=”text-align: left;”></p>

    #14270
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    any help on getting pics up?

    #14274
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Use photobucket mate. Much easier.

    Or if your using your phone and have a smart phone jump on Tapatalk. That’s even easier again

    #14275
    Profile photo of VRSenator065
    VRSenator065
    Participant
    • Adelaide SA
    • VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)

    • View build HERE
    Member since: February 17, 2015
    Posts: 5 777
    Supporter
    #14288
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    hope this works

    Attachments:
    You must be logged in to view attached files.
    #14295
    Profile photo of Judge1 Frazer
    Judge1 Frazer
    Participant
    Member since: February 5, 2016
    Posts: 775
    Supporter

    Hi Jezza very nice what kind of power you looking at , some time and money spent on that puppy

    with photo bucket click on your photo so it is the large one( only photo on the page ) then copy and paste the link img  will then come up bigger on here

     

    #14301
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    thanks for all the tips everyone I will post some more photos soon

    to judge1  power is tricky to predict so don’t want to get ahead of myself the bottom end is very light the crank is very light(crankshaft rebuilders great work)the cam is not overly big(crane sr244)but heads are very good dry sump with vacuum in crankcase is worth a couple of hp and solves oil supply issues(costly exercise when its all -16 fittings pump and adaptors coolers etc)

    I know a couple holdens that have gone 440 ish at the wheels with carbys

    #14472
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    some more photos. the cars a bit dirty ive been waiting for my engine for a while now and its just been sitting

     

    Attachments:
    You must be logged in to view attached files.
    #14945
    Profile photo of Darren
    Darren
    Participant
    Member since: March 4, 2015
    Posts: 33

    that’s Holden porn  :good:

    I’m hoping to get myself a set of COME 590 heads in the not too distant future

    Wish my budget could also extend to one of those Grp A manifolds… will just have to make do with my Trickshift copy

     

    • This reply was modified 8 years, 9 months ago by Profile photo of Darren Darren.
    #16869
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    #16870
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    #16873
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    engine finally in .a lot of plumbing with drysump .now power steering and alt to sort out but getting closer

    #16883
    Profile photo of BLOWNVS
    BLOWNVS
    Participant
    Member since: March 2, 2015
    Posts: 47

    Setup looks killer Jezza, what sort of hp are you expecting out of this engine combination?

    In one of the pictures I noticed it looks like you have a non standard thermostat housing, is that a custom made piece? I need one for my vn group a manifold as well as i didn’t come with one when I purchased it and figured id have to probably make something up similar to suit if a shelf item isn’t available.

    keep the updates coming mate

    #16891
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    its an aeroflow one got it from adam at cronics

    #16894
    Profile photo of BLOWNVS
    BLOWNVS
    Participant
    Member since: March 2, 2015
    Posts: 47

    WA resident as well! cheers mate

    #17166
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    #17167
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    #17168
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

    #17170
    Profile photo of jezza
    jezza
    Participant
    Member since: February 15, 2016
    Posts: 46

Viewing 20 posts - 1 through 20 (of 65 total)

You must be logged in to reply to this topic.