This topic contains 10 replies, has 7 voices, and was last updated by Profile photo of 810ey 810ey 7 years, 2 months ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #24095
    Profile photo of 810ey
    810ey
    Participant
    Member since: April 7, 2015
    Posts: 14

    hi guys this is a few pics of my 1980 vc commodore im putting together, driveline is a lq4 iron block, powerglide and 9”, hoping to run bottom 9s possibly high 8s once sorted

     

     

     

     

     

     

     

     

    • This topic was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This topic was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This topic was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    #24099
    Profile photo of 810ey
    810ey
    Participant
    Member since: April 7, 2015
    Posts: 14

    im using a lq4 block with gen 4 piston n rod combo, gapped rings, stock 317 heads with spring upgrade and mild turbo cam, holley single plain with elbow and an s480 turbo, will be on e85 with a holley dominator ecu, motor made 630whp with a gtx42 proboost on 14psi in another car. (motor in pik is mock l98)

    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    #24102
    Profile photo of Heron SSV
    Heron SSV
    Participant
    Member since: May 5, 2015
    Posts: 585

    I support this thread lol. Giz more details of the setup, what mounts, stall, header setup, how are you running the dump pipe etc.

    I’m putting an LS3 into a VK and plan on going single turbo down the track.

    #24105
    Profile photo of Renno
    Renno
    Participant
    Member since: March 11, 2016
    Posts: 119

    I’m keen to see this thing progress. Keep the updates flowing mate.

    Sent from my iPhone using Tapatalk

    #24115
    Profile photo of gtrboyy
    gtrboyy
    Participant
    Member since: January 20, 2016
    Posts: 201

    Remember this with tunnel; rammed 308 I think.

     

    Got measurements for diff/wheels/tyres?

     

    I like to see how other blokes do their diffs/wheel combo

    #24118
    Profile photo of 810ey
    810ey
    Participant
    Member since: April 7, 2015
    Posts: 14

    na that was the last one i built hypo79, i ended up putting a 2j and powerglide in it then sold it, instantly regretted it so started building this one, diff measures 1400 disc to disc, with 8” wide and 4” backspace. diff was narrowed so it shares wheels with my hq wagon, and before people jump on it yes the commodore is hq bolt pattern

     

     

    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    • This reply was modified 7 years, 3 months ago by Profile photo of 810ey 810ey.
    #24124
    Profile photo of firebug
    firebug
    Participant
    Member since: May 7, 2015
    Posts: 89

    Subscribed! B-)

    Nothing ruins your Friday more than realising it's only Tuesday...

    #24127
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Looks killer. You seem to like ur turbo setups. Any photos of your other vehicles.

    #24130
    Profile photo of 810ey
    810ey
    Participant
    Member since: April 7, 2015
    Posts: 14

    lq4 test fitted, dump pipe will go threw passenger tower, holley intake is a littl tall not sure what il do there yet

     

     

    #24132
    Profile photo of VRSenator065
    VRSenator065
    Participant
    • Adelaide SA
    • VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)

    • View build HERE
    Member since: February 17, 2015
    Posts: 5 777
    Supporter

    I take my eye off the forum for a few days and look what happens.  Outstanding sir!!

    #24273
    Profile photo of 810ey
    810ey
    Participant
    Member since: April 7, 2015
    Posts: 14

     

     

    bit more shed time got rack moved over slow progress while I get new engine set up in hq

    • This reply was modified 7 years, 2 months ago by Profile photo of 810ey 810ey.
    • This reply was modified 7 years, 2 months ago by Profile photo of 810ey 810ey.
Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.