This topic has been reported for inappropriate content
This topic contains 2,648 replies, has 43 voices, and was last updated by 
-
Posts
-
2 Scoops done and I had time to make the Fuel Cell mount! :D
(TIG ran out of Argon on the last weld)
VRSenator065
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777
Hard to tell what’s goign on with hose air scoops, your a better far builder than photographer ha ha.
Hard to tell what’s goign on with hose air scoops, your a better far builder than photographer ha ha.
LOL you’ve hurt my feelings… <jk>
I’m making an Aluminium rear parcel tray as part of the Firewall in the back, the scoops will duct down into it in the corners then there will be an exhaust in the vertical section of the Boot lid, nothing fancy but should work well.
VRSenator065
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Nah don’t get me wrong I like the idea, I really meant I was hoping to get better pics of the details :).
I’ll post some more as it progresses Gary, from the inside it’s just a cutout the same size as the glass.
VRSenator065
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777I really love the build, something totally different.
I really love the build, something totally different.
“Outside the box” doesn’t come close!
VRSenator065
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Nope, designing and fabricating your own irs on a commie is pretty out there. I thought I did some pretty nice stuff on mine, but I was more trying to work around and improve what was there, you just went stuff it, wheres the bin, lets start again
Nope, designing and fabricating your own irs on a commie is pretty out there. I thought I did some pretty nice stuff on mine, but I was more trying to work around and improve what was there, you just went stuff it, wheres the bin, lets start again
I went the same route with the Tonner when I built it, this one being Track only just gave me so much more scope to do it all my way!
Cleaned up the Shed took some pics of the AirBag kit I’m trying to sell then dropped the Empty Argon off at BOC in Bendigo and collected a full from my new Cheap supplier in Kyneton, supermarket on the way home, unloaded hooked up the new cylinder of gas, all good!
What u paying for argon mate? Renting bottles or just pay as u go?
What u paying for argon mate? Renting bottles or just pay as u go?
I rent em, the rental is close between companies within $5>$10, the fill price is 1/3!
What do u pay rent if u don’t mind me asking.
What do u pay rent if u don’t mind me asking.
I’d have to check to be sure but it’s around $200 per year per bottle.
How odd!
Couple of days off, I’ve pinched a nerve in my shoulder folding up the Fuel Cell Mount, Folder is only rated to 1.5mm, the 2.5mm Al sheet required a bit of force to fold… old age sucks.
Still off injured…. will wait till the wing heals more before getting back into it :(
I could probably work through it but I figure why… it’s not like I have an arbitrary deadline like “reality” TV Builds ;)
KAL SPL
- Orange NSW
- L67 VS Calais FSM Niki VS GTS/R replica
View build HERE
Posts: 64What are you doing with your down time ?
What are you doing with your down time ?
Ordering parts, planning, watching movies, reading and eating!
VRSenator065
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777What no beer?
You must be logged in to reply to this topic.
