This topic contains 220 replies, has 25 voices, and was last updated by Profile photo of capssy capssy 7 years, 10 months ago.

Viewing 20 posts - 41 through 60 (of 221 total)
  • Author
    Posts
  • #1465
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    starting tail light loom

    finished

    #1468
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    pedal box assembled

    just an fyi for anyone who gets the ebay fire wall to pedal box rubber on a manual you will need to cut it to clear the clutch master

    #1469
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    installed

    #1471
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    update motor diff and box are painted and finished welding my sump

    before

    after

    #1472
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    deleted my reverse lock out solenoid but kept spring tension

    #1473
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    diff closeup

    #1474
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    modified sump

    #1475
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    small progress made up a bulkhead doubler for my wiring loom cannon plug for the engine came up pretty sweet and i got bored and decided to polish my clutch master cylinder came up pretty shmick

     

    #1477
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    #1480
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    update engine still isnt in but i got my cannon plug mounted coil packs are in mounted in the plenium 6 of the 8 leads as well (i run out of gromets for the last 2 leads) also tracked down a nos roof lining what a mission to put in that was but i got there in the end

    #1481
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    and heres how it sits atm

    #1484
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    thanks mate

    small update sump is back from ceramic polishing and i had some time to make a mounting plate for my glove box fuse box and isolater switches

    #1485
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    #1487
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    progress has been made i finally finished building my engine and gearbox. engine is now a home built ls1 stock crank h beams forged slugs hand ported heads and a mild 224/230 112lsa isky cam gearbox is just a refreshed t56 from a vx ss with 100000 kms or so i was told put a rebuild kit through it inspected everything was pretty happy lets hope its good also finally got my clutch :) os giken twin plate installed it oh and the best part its now in the car :D:D:D

    #1488
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    #1490
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    #1491
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    was abit ocd making sure i dont scratch it lol

    #1495
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    made some small progress started fitting a few things up started to modify my shiftier plate due to the rip shiftier being further forward than i measured up no biggy it all fit the console fine but the shiftier was really high so i made up a shortened shiftier arm came up nice. control arms are back from coating also cam up sweet, ordered all my diff components summit racing alloy case Daytona pinion support and billet lsd and went 4.11 gears which i’ve heard is pretty good for a ls1 t56. my rocker covers landed FINALLY

    • This reply was modified 9 years, 8 months ago by Profile photo of capssy capssy.
    #1496
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    #1500
    Profile photo of capssy
    capssy
    Participant
    Member since: March 1, 2015
    Posts: 178

    progress finally progress extractors back from hpc and fitted, coil overs fitted alternator and brakes.

Viewing 20 posts - 41 through 60 (of 221 total)

You must be logged in to reply to this topic.