HomeForumsTechnical – GeneralEngineLS Rocker Arm Trunion Kit Install

This topic contains 6 replies, has 5 voices, and was last updated by Profile photo of  Anonymous 9 years, 6 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #4260
    Profile photo of VRSenator065
    VRSenator065
    Participant
    • Adelaide SA
    • VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)

    • View build HERE
    Member since: February 17, 2015
    Posts: 5 777
    Supporter

    About to do this to mine, thought I would post the how to.

    #4306
    Profile photo of cava454
    cava454
    Moderator
    Member since: February 20, 2015
    Posts: 2 390
    Supporter

    Good upgrade. Did this in my ute.

     

    The yanks love this mod.

    #4316
    Profile photo of Michael
    Michael
    Participant
    Member since: March 2, 2015
    Posts: 208
    Supporter

    I did this to mine as well. Make sure you have a really small set of circlip pliers. As the circlips are bloody small.

    #4351
    Profile photo of VRSenator065
    VRSenator065
    Participant
    • Adelaide SA
    • VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)

    • View build HERE
    Member since: February 17, 2015
    Posts: 5 777
    Supporter

    Thanks guys, just ordered the kit, for my application they recommended an ARP stud kit instead of the bolts too, so though I might as well do the lot. Will take a heap of pics and post up on my build thread when I do it, cheers

    #6271
    Profile photo of pir4te
    pir4te
    Participant
    Member since: March 2, 2015
    Posts: 154
    Supporter

    Thanks guys, just ordered the kit, for my application they recommended an ARP stud kit instead of the bolts too, so though I might as well do the lot. Will take a heap of pics and post up on my build thread when I do it, cheers

    What lift is your cam?

    Naturally as-pirated, all-motor.

    #6277
    Profile photo of VRSenator065
    VRSenator065
    Participant
    • Adelaide SA
    • VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)

    • View build HERE
    Member since: February 17, 2015
    Posts: 5 777
    Supporter

    What lift is your cam?

    Currently its the standard LSx 454 cam, P/N 19166972, Hydraulic roller, Valve Lift (in): 0.635″ intake / 0.635″ exhaust.

    #6285
    Profile photo of
    Anonymous Member since: January 1, 1970
    Posts: 0

    I ended up using an ARP Rocker stud kit after breaking one of the YT supplied Capscrews.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.