klampyz van

[klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167]

Slow355 wrote:

Lol its going to be loud

 

I hope so ha

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

klampykixx wrote:

Yep that’s all it is. Includes wiring harness and switch packs for the doors.

Very cool.

[klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167]

Hi crew. I’ve been away for a while, obviously.
I bought a house, we moved in back in February and it’s been a while getting settled in.

I ended up pulling the steel frame dash out and have begun working towards getting it together properly.

Ordered a dash from a local wrecker and they sent me an 01 model which physically fitted but it was so far different from mine I had to bin it and sourced a second one from a 98.
Remounted it and have started working on a new cluster. So here’s some pics for you.

 

I wired up some plugs. Figured it was about time I got proper about this.

Test fitting the new acrylic

Holes all cut.

And mounted.

• This reply was modified 5 years, 4 months ago by  klampykixx.
• This reply was modified 5 years, 4 months ago by  klampykixx.
• This reply was modified 5 years, 4 months ago by  klampykixx.

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Welcome come back mate.  Good to see it still alive and well .

[klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167]

Thank you sir.

Next task is to wire it up, including the led alternator light which I believe I have to get fancy with some resistors to make that work properly.

after that is doors/speakers and stereo. And then I can tidy up the carpet/flooring and center console trimming and such.

 

Still a bit to go yet but she’s closer now than she was.

 

 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Nice, I think I need to go back and re read the build thread again from the start and get back up to full speed with this beast!!

[klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167]

VRSenator065 wrote:

Nice, I think I need to go back and re read the build thread again from the start and get back up to full speed with this beast!!

 

Haha, it’s been a roller coaster that’s for sure.

[Author]

Posts