This topic contains 1,535 replies, has 19 voices, and was last updated by Micks 1 month ago.
-
AuthorPosts
-
May 14, 2020 at 10:33 am #32150
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Complete with battle scars
May 14, 2020 at 12:07 pm #32151Prefitted Scars as we may not get a run this year…
May 15, 2020 at 9:03 am #32154Had the pleasure of viewing Ians car last night whilst i went down to pick up some parts he made for me.
All i can say is WOW. This thread does it no justice. Its going to be insane when its done.
May 15, 2020 at 9:22 am #32156Thanks Cav, that seems to be the general consensus from people that have seen it recently, I guess in the pics you don’t get the overall effect as we discussed last night, there’s a LOT going on anywhere you look..
May 16, 2020 at 5:54 pm #32166
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Jealous!!!
- This reply was modified 4 years, 6 months ago by VRSenator065.
May 16, 2020 at 5:56 pm #32168Think I’ve earnt a day off, next time it goes back together will be for keeps..
May 17, 2020 at 7:58 am #32173
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Can not wait to see this thing in motion!!
May 17, 2020 at 8:38 am #32174Looking forward to that myself!
May 17, 2020 at 5:01 pm #32176
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777I bet!!
May 17, 2020 at 5:07 pm #32178Is it just me, or did this come together a lot quicker than the Lexen did?
May 17, 2020 at 5:20 pm #32180Just you, the Lexcen was 13 months total, the BMW is 15 months and counting, could have been finished sooner but the Plague sort of got in the way, this is a far more extensive build though..
May 18, 2020 at 6:42 pm #32183And Home,
Got the strut bar finished so it’s “proper” and functional, made a start on the heatshields only to find I’d grossly underestimated how much material I needed by about 60%.. DOH.
The other day when Craig was down we were discussing what I’m going to do with the side trims, they’re big and heavy and a bit ratty so I want to delete them and use some thin aluminium strips painted black to cover the holes.
In the past one was badly damaged then glued on with silicone, when I took them off the Lexcen I made a total mess of it and ended up doing a LOT of painting, Craig suggested using a “caramel wheel” so I sourced one, awesome no paint damage!
Quick run to Bendigo, sorted made a few more stops to get matching hardware instead of the mismatch I’d used on the drivers side, on the way back made a social call at a mates place.
The office is a bit fullOracecar..
May 20, 2020 at 3:00 pm #32189My to-do list is getting smaller!
Front Axle circlips
Mount Splitter
Wiring
Paint
Windscreens
Door trims inside and out.
May 20, 2020 at 3:40 pm #32190
Judge1 FrazerParticipant- new zealand
- 1983 VB LSA MG9 6060 6 speed
View build HERE
Posts: 775This reply has been reported for inappropriate content.
Hey Ian how did you mount your heat shields just can not really see in photo’s
May 20, 2020 at 3:53 pm #32191I use M6 nutserts Frazer, for the shields to work there needs to be an airgap behind them, in the past I’ve used spacers but it’s a total pita to work with.
Now I bolt them down solid then push a tyre lever in behind them and that creates the gap.
May 22, 2020 at 1:11 pm #32198That’ll do for today, made my exterior trims to replace the body molds and block the holes, then I made a template and cut out my interior door trims, I need a fresh brain before I tackle the cut outs for the handles so maybe tomorrow..
The Strut brace was a fresh brain day, it makes a difference!
May 22, 2020 at 5:21 pm #32199
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Progress is progress, nice work.
May 22, 2020 at 6:09 pm #32200Almost there, only a few jobs left on the list!
May 23, 2020 at 2:52 pm #32203Another job to cross off the list!
May 25, 2020 at 11:24 am #32212
VRSenator065Participant- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
View build HERE
Posts: 5 777Neat!!
-
AuthorPosts
You must be logged in to reply to this topic.