HomeForumsGeneralPhotoshopAfter a bit of work on this VB SL/E…

This topic contains 9 replies, has 5 voices, and was last updated by Profile photo of garvs garvs 9 years, 8 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #2140
    Profile photo of Mistikal
    Mistikal
    Participant
    Member since: March 2, 2015
    Posts: 57

    Chasing some work on a friends VB.

    – Try and delete the metal fence at the rear of the car, to simulate that the carpark does not stop there but continues further past the edge of the image.
    – Change the ground behind the car to a continuation of the concrete the car is parked on.
    – Continue the concrete wall in front of the car, replacing the black metal fence
    – Remove the join in the concrete wall.
    – Remove the weeds against the wall if possible.
    – Remove the metal pole at the far left edge of the photo.
    – The wheels usually have a Simmons cap on the hub, similar to the link below – try add something to the wheels to cover the hub.
    – Remove the key guard around the front door lock.
    – ‘Close’ the drivers window, as it was open a touch in the photo.
    – Tidy up as you see fit, but please don’t change anything else on the car.
    – Clean up the photo, its a bit washed out…
    – Depending on how it turns out, perhaps rotate the picture a touch just so the car sits level… not concerned about this if the end result is no good.

    Idea is to have a very clean, minimalist industrial looking backdrop, with the car being the only focus of attention but still retaining a minor level of detail in the surrounding area.

    Link to wheel caps (black cap, yellow rectangle with SIMMONS in the middle) — https://www.google.com.au/search?q=simmons+wheel+caps&tbm=isch

    Image of the car (deliberately did not put in image tags) — http://i.imgur.com/Tkun7Hp.jpg

    Many thanks in advance, this will bring a huge smile to a close friend of mine as it is something I would love to get professionally printed and framed.

    If a higher-res image is sought, the original is 4128*2322 and can be emailed/etc.

    • This topic was modified 9 years, 8 months ago by Profile photo of Mistikal Mistikal. Reason: Clarification
    #2142
    Profile photo of Jaba
    Jaba
    Participant
    Member since: February 18, 2015
    Posts: 103

    Jesus, don’t want much do you lol. Would almost be worth just taking the photo again.

    But I like a challenge. I’ll do it tomorrow mate. Should be able to do everything requested.

    #2155
    Profile photo of garvs
    garvs
    Participant
    Member since: March 2, 2015
    Posts: 17

    have done it in the full size too… :)

    Attachments:
    You must be logged in to view attached files.
    #2158
    Profile photo of SSN8TD
    SSN8TD
    Participant
    Member since: March 1, 2015
    Posts: 37

    Wow, nice photoshop! Very impressive

    #2160
    Profile photo of garvs
    garvs
    Participant
    Member since: March 2, 2015
    Posts: 17

    Wow, nice photoshop! Very impressive

    Some backgrounds are easy to manipulate ;)  others not so…

    Everything in that photochop was not too hard to do overall, just a little time :) it all worked out well, hardest part was closing the window and getting that to look decent.

    Thanks for the praise. haha

    #2317
    Profile photo of Mistikal
    Mistikal
    Participant
    Member since: March 2, 2015
    Posts: 57

    Ah you’re a legend :D Where may I obtain a copy of the full-size?

    #2322
    Profile photo of garvs
    garvs
    Participant
    Member since: March 2, 2015
    Posts: 17

    pm me your email and i will send

    #2325
    Profile photo of Mistikal
    Mistikal
    Participant
    Member since: March 2, 2015
    Posts: 57

    PM sent!

    #2327
    Profile photo of Kroozer
    Kroozer
    Participant
    Member since: February 19, 2015
    Posts: 336
    Supporter

    Thats a bloody awesome effort on the chop mate :)

    #2332
    Profile photo of garvs
    garvs
    Participant
    Member since: March 2, 2015
    Posts: 17

    Email sent… it should print out fine :)

    Thanks Kroozer :)

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.