This topic contains 121 replies, has 20 voices, and was last updated by 
Judge1 Frazer 2 years, 11 months ago.
-
Posts
-
Next was to sort out the pedal box and intermittent throw out bearing noise. I had suspected that the spring on the pedal might have been broken but once I stuck my head up under the dash and had a look it was worse. The pedal box was cracked and peeling away.
Straightened up and welded back together
Then with that fixed on to pulling out the box and fit the new clutch kit
Ummm yeah about that 5.0 life…
Much better
New boot and retaining spring because the spring was missing for some reason?
New pivot ball because the old one hasn’t seen grease for quite awhile and was worn
Had to helicoil one of the bell housing threads because someone gave it to many ugga dugga’s
New clutch in ready to go all back together
Judge1 Frazer
- new zealand
- 1983 VB LSA MG9 6060 6 speed
View build HERE
Posts: 775
Awesome job mate nice to see someone clean stuff before they put it back. top work
You must be logged in to reply to this topic.
